Point of Attachment Products
point-of-attachment-products
Model 8063801 is designed to allow the user to pre-select a low pressure alarm setting between 30 and 300 psi with a 1% repeatability accuracy. The Factory preset alarm setting is 100 psi, which can be changed by the user if desired.
Model 8063801 operates from the included Continuous Operating Adapter (P/N 80247), or it can be operated from the replaceable internal 9 volt transistor battery for short periods of time. The unit also includes a provision to attach an optional external audible alarm/strobe (P/N 8066901) or strobe (P/N 8008503) to further assure the safety of the operator(s). /Asset/a4081.jpg
Low Pressure Alarm System
This is an air distribution system that will alarm when the supplied air falls below a preset air pressure setting. When the inlet air pressure falls below the preset level specified in the model number, a pressure switch connects the internal 9 volt transistor battery to the alarm (rated 119dB(A). The alarm will continue to operate until the pressure in the system exceeds the preset level. /Asset/Low-Pressure.gif Point of Attachment Panel
The point of attachment panel removes any contaminants introduced between the purification/filtration panel and the point of attachment panel. /Asset/Point-of-Attachment-Panel.gif Automatic Shut-off/Back-Up Diverter Device (ASODD)
MST's Automatic Shut-Off Diverter Device, (ASODD), is designed to supply compressed air from a main source and divert to a secondary air source when an outside signal has energized the ASODD's solenoid valve. The main air source enters at 1/2" FPT and exists at 1/2" FPT. The ASODD's power requirement is 120 VAC and can be supplied through a supplied power cord. When an outside signal source energizes the ASODD's switching relay through the signal cord/plug, the ASODD's solenoid valve shuts off the main air source and allows the secondary air sourced to flow to the outlet. When the signal source de-energizes, the air flow will be diverted back to the main air source The signal source can be any 1.0 amp maximum at 12 VDC. /Asset/Automatic-Shut-off.gif Air Shut-Off Device (ASOD)
The MST Model 8010501 Air Shut-Off Device (ASOD) is a small, compact valving system designed to interrupt the air supply to MST's Breathing Air Filtration and/or Purification Systems should the carbon monoxide monitoring system in the Filtration and/or Purification system go into an alarm condition. /Asset/Automatic-Shut-off.gif MST® Low Pressure Alarms
MST®'s Model 8063801 Low Pressure Alarm is a low pressure warning system utilized to alert an operator using compressed air for various pressure sensitive applications.Model 8063801 is designed to allow the user to pre-select a low pressure alarm setting between 30 and 300 psi with a 1% repeatability accuracy. The Factory preset alarm setting is 100 psi, which can be changed by the user if desired.
Model 8063801 operates from the included Continuous Operating Adapter (P/N 80247), or it can be operated from the replaceable internal 9 volt transistor battery for short periods of time. The unit also includes a provision to attach an optional external audible alarm/strobe (P/N 8066901) or strobe (P/N 8008503) to further assure the safety of the operator(s). /Asset/a4081.jpg
