Direct Driven Rotary Screw Compressor
- No belts to adjust or replace.
- 100% Duty Cycle.
Smallest and Lightest in its Class
- More space for tools and other equipment.
- More payload available.
Integral Hydraulic Oil Cooler
- No need for an external hydraulic cooler if you are only installing the compressor system.
- Uses over-sized cooler to maintain low hydraulic temperatures.
Hydraulic and Compressor Oil Temperature Sensing
- Protects the compressor from overheating.
- Cold start protection for the hydraulic motor and cooler.
- Prevents hydraulic oil from overheating.
Soft Start Feature
- Reduces load placed on the hydraulic system during the compressor startup.
- Increases compressor life.
Air Pressure Unload Circuit
- Reduces air pressure when not using air but the system is on.
- Reduces thermal load when the compressor is not in use.
- Reduces fuel consumption on truck.
- Increases compressor life.
Hydraulic Standby Mode
- Turns off hydraulic oil to the motor when air is not being used.
- Will automatically re-start when air is required.
- Delay is adjustable via the remote control box.
- Reduces thermal load when the compressor is not in use.
- Reduces fuel consumption.
Built In One-Way Check Valve
- No need to purchase when installing an air reservoir tank.
- Protects the compressor system from contamination from downstream sources.
Throttle Enable Lead
- Allows use of second throttle speed.
- Drops truck engine back to base idle when not using air.
Above Deck Mounted
- When properly maintained, VMAC compressors should last for the service life of your vehicle.
- Your truck hydraulic system powers the compressor. There are no additional engines to maintain or carry additional fuel for. Again saving you time, money and energy.
- Easily transferable to new service truck body.
