Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
Nothing will stop you on the jobsite; with everything you need in a single compact system, you will be ready for anything.

This self-contained system can be fully integrated into any diesel work truck fuel system or skid-mounted for stand-alone applications with an optional external fuel tank.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Brands

 N/A VMAC®

Air Compressor Output at 100 Pound Per Square Inch (psi) (Maximum 175 Pound Per Square Inch (psi))

 N/A 45 ft³/min

Air Compressor Type

 N/A Belt-driven, 100% duty cycle, VMAC® oil-injected rotary screw

Engine

 N/A Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

Approximate Weight (Wet)

 N/A 570 lb259 kg

Included Power Take-Off (PTO)

 N/A Clutched SAE ‘A’ port with 9-toothed spline, 2,800 RPM output, 35 ft-lbs continuous torque max (Patented)

Optional Hydraulic Pump Flow at Maximum 3500 Pound Per Square Inch (psi)

 N/A 10 gpm5 gpm8 gpmOr choose your own

Throttle Control

 N/A 2-speed throttle, responds to air demand

Battery

 N/A AC Delco 12 V, 460 CCA, 575 CA

Noise Level (High Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 81.2 dB

Noise Level (Low Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 76 dB

Noise Level (Standby Mode) at 21 Feet (ft) (6.4 Meters (m))

 N/A 0 dB

Fuel Supply Options

 N/A
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External Diesel Fuel Pump Kit

Air Receiver Tank (Recommended, Not Included)

 N/A Minimum 10-Gallon Air Receiver Tank - Recommended for proper operation of all functions.

Dimensions

Width

 N/A 23 in58.4 cm

Length

 N/A 33 in83.8 cm

Height

 N/A 29 in29 cm

Base Footprint Length

 N/A 30 in76.2 cm

Base Footprint Width

 N/A 20 in50.8 cm

Note for Dimension

 N/A Designed to fit on side pack with center slider

AC/DC Generator/Welder

AC/DC Generator/Welder

 N/A AC:
  • 8 kW continuous output
  • 1 x 30 A, 240 V, 60 Hz 3 phase circuit (w/wo receptacles)
  • 2 x 20 A, 120 V, 60 Hz single phase circuit (w/wo receptacles)
DC: For battery boosting/charging; other DC loads
  • Boost – 300 A max at 13 V; Charge – 12 V,24 V,36 V,48 V
  • CC mode for SMAW and GTAW (stick/TIG welding)
  • 250A at 35% duty cycle; 190A at 60% duty cycle

Components Included

Components Included

 N/A Air Compressor
  • High airflow, 100% duty cycle with the reliability of the global leader in mobile compressed air.
Welder
  • Multi-process welding including gouging, constant current, constant voltage and the ability to run a suit-case style wire feeder.
Battery Charger
  • Keep your customers up and running with a mobile battery charger.
Battery Booster
  • Boost anything from a car to a haul truck.
Generator
  • Proven mobile power solution to run your electronic equipment and electric tools.
PTO Port
  • 2,800 RPM Power Take-off Port.
Cold Climate Protection for -40º
  • Cold Climate Protection recommended if ambient temperatures frequently drop below -10 ºC (14 ºF). Combine with optional 1750W inverter and warm the system on the way to the job site.

Cold Climate Protection

Cold Climate Protection

N/A
  • Two years on all major components; VMAC® air-ends are covered by VMAC®'s Lifetime Limited Warranty
  • Kubota engine is covered by Kubota's 2-year Limited Warranty

Control System

Control System

 N/A
  • Customizable digital controls
  • Remote mounted generator/welder and compressor control panels
  • Any one function or all three can be selected at any time
  • Engine auto-restarts with air demand
  • Separate selector switches engage compressor, generator and PTO
  • With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
  • With any other function selected, the engine will not shut down automatically
  • Programmable auto restart for cold temperature or low battery voltage

Warranty

Warranty

 N/A Two years on all major components; VMAC® air ends are covered by VMAC®’s Lifetime Warranty; the Kubota engine is covered by Kubota’s 2-Year warranty.

Applications

Applications

 N/A Common jobs that use 6-in-1 Power Systems:
  • Mobile heavy duty mechanics
  • Heavy equipment repair technicians
  • Remote access jobs in mining, logging and oil & gas