The New Reliant™ RS45 - The Most Powerful, Lightweight, Air Compressor in its Class.
55 % Lighter. Quieter Operation. More Air Power Than the Competition.
Vanair® once again is listening and meeting the demands of the marketplace with the introduction of the new Reliant™ RS45 air compressor; the most powerful, lightweight system in its class. At 55 % less weight than its predecessor, the RS45's featherweight rust-proof aluminum canopy reduces truck weight and fuel consumption. Providing an impressive 45 cfm and 150 psi of on-demand air power at 100 % duty cycle, the RS45 has the highest cfm rating in its class.
Brands |
N/A Reliant™ Vanair® |
Model |
N/A RELIANT RS45 |
Capacity |
N/A 45 cfm |
Air Pressure |
N/A 150 psi |
Hydraulic Flow |
N/A 11 gpm |
Hydraulic Pressure |
N/A 2600 psi |
Note for Hydraulic Flow and Pressure |
N/A
Ratings are approximate and are based on 120 ºF hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details. |
| Dry Weight1 | N/A 195 lb |
Ambient Operating Range |
N/A 0 to 125 ºF |
Available Direct Current (DC) Voltage |
N/A 12 V24 V |
Cooling Capacity |
N/A Up to 175 psi |
Motor Type |
N/A Gear |
Drive System |
N/A Hydraulic Driven |
Air to Oil Cooler |
N/A
|
Hydraulic Cooler |
N/A
|
Length with Fittings |
N/A 35.3 in |
Width with Fittings |
N/A 22.8 in |
Height with Fittings |
N/A 22.75 in |
Encapsulated Air Compressor |
N/A
|
Hydraulics |
N/A
|
Instrumentation |
N/A
|
Safety Equipment |
N/A
|
Serviceability/Convenience |
N/A
|
Canopy |
N/A
|
Accessories and Options |
N/A
|
Hydraulic System Requirements |
N/A
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit). |
