Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
Kellogg-American Industrial Air Compressors are engineered and built for rugged use. We use premium single phase and three phase motor options with standard magnetic starters. Every component is specified to provide industrial duty performance. Kellogg-American Compressors are designed for professional use, working in extreme environments, providing all the air needed to get the job done.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Brands

 N/A Kellogg-American

Model

 N/A K452

Weight

 N/A 250 lb

Pump Speed

 N/A 500 to 800 rpm

Pump Power

 N/A 6.5 to 11.0 hp

Stages

 N/A 2

Configurations

 N/A V

Maximum Pressure

 N/A 175 psi

Number of Cylinders

 N/A 4

Low Pressure Bore

 N/A 4.75 in120 mm

High Pressure Bore

 N/A 2.50 in64 mm

Stroke Size

 N/A 3.00 in76 mm

Industry Standards/Certifications

 N/A Vertical ASME Certified Tanks

Features

N/A

  • Kellogg-American Pumps
  • Assembled in the USA
  • Expanded Metal Belt Guards
  • TEFC (Totally Enclosed Fan Cooled) Motors
  • Condor Pressure Switches
  • IEC Rated Magnetic Starters
  • Vertical ASME Certified Tanks

Additional Information

N/A Kellogg-American Compressors have been a source of reliable compressed air power since 1906. Over the years the basic design parameter has remained the same, a reliable, heavy duty unit to serve the user whose livelihood depends on compressed air.

  • The patented "Ring Flo" oil lubrication system offers positive force feed oil flow with only one moving part - the ring - no oil pump or gear.
  • Kellogg-American uses Swedish steel concentric ring valves and high quality copper gaskets which withstand the higher temperatures better and make it easier to remove the valves for normal maintenance.
  • Kellogg-American Compressor cylinders and heads are made from "close grain" cast iron.
  • The Intercooler has large fully finned tubes for maximum flow, minimum pressure drop rod friction, and the Kellogg-American two stage units have the most intercooling area on a per horsepower basis.
  • Two stage units utilize the rugged "EMBLOC" design which offers greater strength and resistance to warping due to heat and mechanical stress.