Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
Ideal for hydraulic crane trucks that need an air compressor – this package keeps you working without relying on your truck engine.

This self-contained system can be fully integrated into any diesel work truck fuel system or skid-mounted for stand-alone applications with an optional external fuel tank.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Brands

 N/A VMAC®

Power Source

 N/A Hydraulic

Air Compressor Output at 100 Pound Per Square Inch (psi) (Maximum 175 Pound Per Square Inch (psi))

 N/A 45 ft³/min

Air Compressor Type

 N/A Belt-driven, 100% duty cycle, VMAC® oil-injected rotary screw

Engine

 N/A Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

Included Power Take-Off (PTO)

 N/A Clutched SAE ‘A’ port with 9-toothed spline, 2,800 RPM output, 35 ft-lb continuous torque (max)

Hydraulic Pump Flow at Maximum 3500 Pound Per Square Inch (psi)

 N/A 10 gpm5 gpm8 gpmOr choose your own

Throttle Control

 N/A 2-speed throttle, responds to air demand

Battery

 N/A AC Delco 12 V, 460 CCA, 575 CA

Approximate Weight (Wet)

 N/A 500 lb227 kg

Noise Level (High Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 81.2 dB

Noise Level (Low Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 76 dB

Noise Level (Standby Mode) at 21 Feet (ft) (6.4 Meters (m))

 N/A 0 dB

Fuel Supply Options

 N/A
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External Diesel Fuel Pump Kit

Air Receiver Tank (Recommended, Not Included)

 N/A Minimum 10-Gallon Air Receiver Tank -Recommended for proper operation of all functions.

Dimensions

Length

 N/A 83.8 cm33 in

Width

 N/A 23 in58.4 cm

Height

 N/A 29 in73.7 cm

Mounting Plate Length

 N/A 20 in50.8 cm

Mounting Plate Width

 N/A 20 in50.8 cm

Control System

Control System

 N/A
  • Customizable digital controls
  • Remote mounted compressor control panel
  • Any one function or all three can be selected at any time
  • Engine auto-restarts with air demand
  • Separate selector switches engage compressor, and PTO
  • With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
  • With any other function selected, the engine will not shut down automatically
  • Programmable auto restart for cold temperature or low battery voltage

Cold Climate Protection

Cold Climate Protection

N/A
  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41 ºF (5 ºC) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23 ºF (-5 ºC); small heat strip included in LCD Digital Control Box.
  • Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates.

Warranty

Warranty

 N/A Two years on all major components; VMAC® air ends are covered by VMAC®’s Lifetime Warranty; the Kubota engine is covered by Kubota’s 2-Year warranty.

Components Included

Components Included

 N/A Air Compressor
  • High airflow, 100% duty cycle with the reliability of the global leader in mobile compressed air.
  • 45 CFM Rotary Screw Air Compressor
PTO Port
  • 2,800 RPM Power Take-off Port.
Cold Climate Protection for -40º
  • Cold Climate Protection recommended if ambient temperatures frequently drop below -10 ºC (14 ºF). Combine with optional 1000W inverter and warm the system on the way to the job site.
  • Factory-installed Cold Climate Kit – 120 V, tested to -40 °F (-40 °C)

Applications

Applications

 N/A Common jobs that use the Compressor-Generator Power System:
  • Mobile heavy duty mechanics
  • Heavy equipment repair technicians
  • Remote access jobs in mining, logging and oil & gas