Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > Portable Air Compressors > Multi-Function Compressors > Hydraulic Capable > Air N Arc® 300 Hydraulic All-In-One Power System® > Item # 050735  


Item # 050735, Air N Arc® 300 Multi-Function Hydraulic All-In-One Power System®
Web Price QUOTE

Five Forms of Power - One Unit, Hydraulically Driven

The Air N Arc® 300 Hydraulic All-In-One Power System® features the innovation of being hydraulically driven, while still offering all the advantages of the Air N Arc® 300 engine drive system including a 40 CFM rotary screw air compressor, 300 AMP welder, 300 AMP 12 V charger and 12V/24 V booster, and 7 kW generator. Designed as a true two generator system, the Air N Arc® 300 Hydraulic allows simultaneous dual functionality such as welding and generator for lights for nighttime service. The system offers a small footprint for side pack or behind-the-cab mounting and is ideal for trucks with hydraulics already installed, such as crane trucks.





Financing  · Specifications  · Generator  · Welder  · Dimensions with Fittings  · Special Features  · Air Compressor  · Generator Specifications  · Remote Control Panel  · Optional Accessories  · Hydraulic System Requirements  · Note

Financing

Approve Payments
Finance with Approve Payments



Specifications

Brands
Air N Arc®
Vanair®

Drive System
Open Center Hydraulic

Hydraulic Flow at 2800 Pound Per Square Inch (psi) Pressure (Multi-Function)
19 gpm

Type
Multi-Function

Compressor Type
Rotary Screw

Capacity at 150 Pound Per Square Inch (psi) Air Pressure
40 ft³/min

Maximum Rated Pressure
175 psi

Warranty
Lifetime


Generator

Peak Alternating Current (AC) Power
7 kW

Continuous Alternating Current (AC) Generator Power
6.8 kW

Frequency
60 Hz

Phase
1

Generator Outlet Voltage
120 V
240 V


Welder

Welder Current at 100 Percent Duty Cycle
270 A

Welder Operating Constant Current (CC) Range
40 to 300 A

Welder Constant Voltage (CV) Range
15 to 30 V

Battery Charge/Booster
300 AMPs 12 V/24 V Boost, 50 AMP 12 V Charge

Welder
  • High Frequency DC Welding
  • Independent DC Welder
  • Safe Multi-Function


Dimensions with Fittings

Length with Fittings
48.7 in

Width with Fittings
21 in

Height with Fittings
30.9 in

Dry Weight with Control Panel
621 lb


Special Features
  • Single Function 14.5 GPM Model is Suitable for Ford® 4X4 Super Duty and Dodge® Trucks
  • True Two Generator System for Safe Multi-function of Welder and Electric Tools
  • Small Footprint - Will Fit on Side Pack or Behind Cab
  • Integrated Hydraulic Cooler
  • CV MIG Capability
  • One Unit to Start all Your Equipment with Battery Charge and Boost Capability
  • Rotary Screw Air Compressor for Air on Demand
  • Heavy Duty Belt Drive System for Anti-vibration and Long Service Intervals
  • Integrated Lift Hook
  • Designed with Hinged Lid for Easy Maintenance
  • Powder Coated Sheet Metal
  • Galvannealed Steel


Air Compressor

Air Compressor
Rotary Screw Compressor - Encapsulated


Generator Specifications
  • Independent AC Power for Safe Multi-functioning
  • Brushless
  • Smooth Wave for Minimal Distortion
  • Two-120 V Outlets and One-240 V Outlet


Remote Control Panel
  • Provides Ultimate User Convenience and Safety
  • All Functions Accessible at Panel. No Need to Jump In and Out of Vehicle.


Optional Accessories
  • Welding Cables - 25', 50'
  • Welding Helmet with Auto Darkening Lens
  • Battery Booster Cables
  • Cable Extension Segment
  • Remote Air Tank - 30 Gallon
  • Remote Condensation Drain
  • Maintenance Kits
  • Welding Rods
  • Compressor Air Inlet Heater
  • Hose Reels and Fittings
  • OSHA Safety Valve (Velocity Fuse)
  • Post Drivers
  • Service/Control Line Moisture Separators
  • Tool Oiler/Lubricator


Hydraulic System Requirements
All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).


Note
Ratings are approximate and are based on 120 ºF hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details.

Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligation.