Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > Flow Thermal > VA 570 Inline Flowmeters > Item # 0695 2577  


Item # 0695 2577, VA 570 Flowmeter with Integrated 3 Inch (In) Measuring Section with Flange
Web Price QUOTE

VA 570 is supplied with an integrated measuring section. The measuring sections are available in flanged version or with R resp. NPT thread.

A special feature is the removable measuring head. So the measuring unit can be removed easily and quickly for calibration or cleaning purposes without having to dismount the measuring section intricately. During this period the measuring section is sealed by a closing cap (accessory).





Financing  · Specifications  · Measuring Range  · Flange  · Connection to Different Bus Systems Options  · Special Measurement Technology Features  · Special Mechanical Features  · Additional Information

Financing

Approve Payments
Finance with Approve Payments



Specifications

Measuring Range
Up to 164 ft/s, Low-Speed Version
Up to 304 ft/s, Standard Version
Up to 607 ft/s, Maximum Version
Up to 735 ft/s, High-Speed Version

Note for Measuring Range
All measured values related to DIN 1343 standard conditions 32 ºF and 14.7 psi ex works.

Accuracy
± 0.3% of Full Scale (F.S.)
± 1.5% of Measured Value (M.V.)

Accuracy on Request
± 1.0% of Measured Value (M.V.)
± 0.3% of Full Scale (F.S.)

Accuracy Indications
Relative to Ambient Temperature 71.6 ºF +2 ºF, System Pressure 6 bar

Repeatability
0.25% of Measured Value (M.V.) in Case of Correct Mounting (Mounting Aid, Position, Inlet Section)

Measuring Principle
Thermal Mass Flow Sensor

Response Time
t 90 <3 sec

Operating/Ambient Temperature Range
-4 to 158 ºF

Media Temperature Range
-4 to 356 ºF

Media Temperature Range (ATEX Version)
-4 to 248 ºF

Adjustment Possibilities via Display, External Hand- Held Device PI 500, PC Service Software, Remote Diagnosis
Nm³/h, Nm³/min, Nl/min, l/s, ft/min, cfm, kg/h, kg/min, inner diameter, reference conditions ºC/ºF, mbar/hPa, zero point correction, leak flow volume suppression, scaling analog output 4...20 mA, pulse/alarm, error codes etc.

Standard Outputs
1 x 4 to 20 mA Analog Output (Electrically Not Isolated)
Pulse Output
RS 485 (Modbus-RTU)

Optional Outputs
2 x 4 to 20 mA Active
HART
M-Bus
Mod- bus TCP
Profibus DP
Profinet

Burden
<500 Ω

Additional Average Value Calculation
For all parameters freely adjustable from 1 minute up to 1 day, e. g. 1/2 hours average value, average day value

Protection Class
Ingress Protection (IP 64) for ATEX II 2D Ex tb IIIC T90°C Db
Ingress Protection (IP 67)

Housing Material
Die-Cast Aluminum

Sensor Tube Material
Stainless Steel 1.4404

Operating Pressure
232 psi

Special Version Operating Pressure
580 psi

Direct Current (DC) Supply Voltage
18 to 36 V

Power Supply
5 W

Approval
ATEX II 2G Ex db IIC T4 Gb
ATEX II 2D Ex tb IIIC T90 ºC Db
DVGW


Measuring Range

Low-Speed Air Flow (164 Feet Per Seconds (ft/s))
765 L/min
450 ft³/min

Standard Air Flow (304 Feet Per Seconds (ft/s))
1420 m³/h
835 ft³/min

Maximum Air Flow (607 Feet Per Seconds (ft/s))
2840 m³/h
1670 ft³/min

High-Speed Air Flow (735 Feet Per Seconds (ft/s))
3440 m³/h
2025 ft³/min

Note for Air Flow
Reference conditions DIN 1945 / ISO 1217: 68 ºF, 14 psi

Low-Speed Argon (Ar) Flow (164 Feet Per Seconds (ft/s))
1200 L/min
705 ft³/min

Standard Argon (Ar) Flow (304 Feet Per Seconds (ft/s))
2225 m³/h
1310 ft³/min

Maximum Argon (Ar) Flow (607 Feet Per Seconds (ft/s))
4440 m³/h
2615 ft³/min

High-Speed Argon (Ar) Flow (735 Feet Per Seconds (ft/s))
5380 m³/h
3165 ft³/min

Note for Argon (Ar) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Carbon Dioxide (CO2) Flow (164 Feet Per Seconds (ft/s))
760 L/min
445 ft³/min

Standard Carbon Dioxide (CO2) Flow (304 Feet Per Seconds (ft/s))
1405 m³/h
825 ft³/min

Maximum Carbon Dioxide (CO2) Flow (607 Feet Per Seconds (ft/s))
2810 m³/h
1655 ft³/min

High-Speed Carbon Dioxide (CO2) Flow (735 Feet Per Seconds (ft/s)
3405 m³/h
2000 ft³/min

Note for Carbon Dioxide (CO2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Nitrogen (N2) Flow (164 Feet Per Seconds (ft/s))
705 L/min
415 ft³/min

Standard Nitrogen (N2) Flow (304 Feet Per Seconds (ft/s))
1305 m³/h
770 ft³/min

Maximum Nitrogen (N2) Flow (607 Feet Per Seconds (ft/s))
2610 m³/h
1535 ft³/min

High-Speed Nitrogen (N2) Flow (735 Feet Per Seconds (ft/s))
3165 m³/h
1860 ft³/min

Note for Nitrogen (N2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Oxygen (O2) Flow (164 Feet Per Seconds (ft/s))
730 L/min
430 ft³/min

Standard Oxygen (O2) Flow (304 Feet Per Seconds (ft/s))
1355 m³/h
795 ft³/min

Maximum Oxygen (O2) Flow (607 Feet Per Seconds (ft/s))
2710 m³/h
1590 ft³/min

High-Speed Oxygen (O2) Flow (735 Feet Per Seconds (ft/s))
3280 m³/h
1930 ft³/min

Note for Oxygen (O2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Nitrous Oxide (N2O) Flow (164 Feet Per Seconds (ft/s))
750 L/min
440 ft³/min

Standard Nitrous Oxide (N2O) Flow (304 Feet Per Seconds (ft/s))
1395 m³/h
820 ft³/min

Maximum Nitrous Oxide (N2O) Flow (607 Feet Per Seconds (ft/s))
2785 m³/h
1640 ft³/min

High-Speed Nitrous Oxide (N2O) Flow (735 Feet Per Seconds (ft/s))
3375 m³/h
1985 ft³/min

Note for Nitrous Oxide (N2O) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Natural Gas (NG) Flow (164 Feet Per Seconds (ft/s))
450 L/min
265 ft³/min

Standard Natural Gas (NG) Flow (304 Feet Per Seconds (ft/s))
840 m³/h
495 ft³/min

Maximum Natural Gas (NG) Flow (607 Feet Per Seconds (ft/s))
1680 m³/h
985 ft³/min

High-Speed Natural Gas (NG) Flow (735 Feet Per Seconds (ft/s))
2035 m³/h
1195 ft³/min

Note for Natural Gas (NG) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi


Flange

Flange Pipe Size
3 in

Flange Outer Pipe Diameter
88.9 mm

Flange Inner Pipe Diameter
80.9 mm

Dimension L (Flange)
18.7 in

Note for Dimension L (Flange)
Attention: Shortened inlet section. Please observe the recommended minimum inlet section (length = 15 x inner diameter) on site.

Dimension L1 (Flange)
10.83 in

Dimension H (Flange)
12.91 in

Dimension H1 (Flange)
8.98 in

Diameter D (Flange)
200 mm

Diameter K (Flange)
160 mm

Number of Diameter L (Flange)
8

Diameter L (Flange)
18 mm


Connection to Different Bus Systems Options
There are different options available for connection to modern Bus systems:
  • Ethernet interface (Modbus-TCP) / PoE
  • M-BUS
  • Modbus-RTU
  • Profibus DP interface (in process)
  • Profinet interface (in process)
  • HART (in process)


Special Measurement Technology Features
  • 4 values on the display: Flow, total consumption, velocity, temperature. Units freely adjustable
  • All measured values, settings such as gas type, inner diameter, serial number and so on can be accessed via Modbus-RTU
  • Comprehensive diagnostic functions readable on the display or remote access via Modbus such as calibration cycle, error codes, serial number
  • Notification in case of exceeding the calibration cycle
  • Standard version accuracy 1.5% of m.v. ± 0.3% of f.s.
  • Precision version accuracy 1.0% of m.v. ± 0.3% of f.s
  • Measuring span of 1 : 1000 (0.33 ft/s up to 735 ft/s)
  • Configuration and diagnosis via display, hand-held device PI 500, PC service software on-site
  • Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable via PC service software or external device DS 400, DS 500, PI 500
  • Reference conditions ºC and PST / hPA freely adjustable
  • In-Situ adjustment, leak flow volume suppression
  • Pressure loss negligible


Special Mechanical Features
  • Robust impact-proof aluminum die cast housing for the outdoor area IP 67
  • All wetted parts made from stainless steel 1.4404
  • On request with DVGW approval for natural gas (up to 232 psi)
  • Pressure range up to 232 psi, special version up to 580 psi
  • Media temperature range up to 356 ºF (ATEX version up to 248 ºF)
  • No moveable parts, no wear
  • Sensor tip very robust, easy to clean
  • Housing rotatable, display rotatable by -356 ºF


Additional Information
The screwing with a centring device is designed such that the sensor is positioned accurately in the center when screwing it into the measuring section; furthermore, it enables an exact positioning in the flow direction. This eliminates unnecessary measuring faults.