Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > Compressed Air Gas Monitors & Instrumentation > Flow Thermal > VA 570 Inline Flowmeters > Item # 0695 2575  


Item # 0695 2575, VA 570 Flowmeter with Integrated 2 Inch (In) Measuring Section with Flange
Web Price QUOTE

VA 570 is supplied with an integrated measuring section. The measuring sections are available in flanged version or with R resp. NPT thread.

A special feature is the removable measuring head. So the measuring unit can be removed easily and quickly for calibration or cleaning purposes without having to dismount the measuring section intricately. During this period the measuring section is sealed by a closing cap (accessory).





Financing  · Specifications  · Measuring Range  · Flange  · Connection to Different Bus Systems Options  · Special Measurement Technology Features  · Special Mechanical Features  · Additional Information

Financing

Approve Payments
Finance with Approve Payments



Specifications

Measuring Range
Up to 164 ft/s, Low-Speed Version
Up to 304 ft/s, Standard Version
Up to 607 ft/s, Maximum Version
Up to 735 ft/s, High-Speed Version

Note for Measuring Range
All measured values related to DIN 1343 standard conditions 32 ºF and 14.7 psi ex works.

Accuracy
± 0.3% of Full Scale (F.S.)
± 1.5% of Measured Value (M.V.)

Accuracy on Request
± 1.0% of Measured Value (M.V.)
± 0.3% of Full Scale (F.S.)

Accuracy Indications
Relative to Ambient Temperature 71.6 ºF +2 ºF, System Pressure 6 bar

Repeatability
0.25% of Measured Value (M.V.) in Case of Correct Mounting (Mounting Aid, Position, Inlet Section)

Measuring Principle
Thermal Mass Flow Sensor

Response Time
t 90 <3 sec

Operating/Ambient Temperature Range
-4 to 158 ºF

Media Temperature Range
-4 to 356 ºF

Media Temperature Range (ATEX Version)
-4 to 248 ºF

Adjustment Possibilities via Display, External Hand- Held Device PI 500, PC Service Software, Remote Diagnosis
Nm³/h, Nm³/min, Nl/min, l/s, ft/min, cfm, kg/h, kg/min, inner diameter, reference conditions ºC/ºF, mbar/hPa, zero point correction, leak flow volume suppression, scaling analog output 4...20 mA, pulse/alarm, error codes etc.

Standard Outputs
1 x 4 to 20 mA Analog Output (Electrically Not Isolated)
Pulse Output
RS 485 (Modbus-RTU)

Optional Outputs
2 x 4 to 20 mA Active
HART
M-Bus
Mod- bus TCP
Profibus DP
Profinet

Burden
<500 Ω

Additional Average Value Calculation
For all parameters freely adjustable from 1 minute up to 1 day, e. g. 1/2 hours average value, average day value

Protection Class
Ingress Protection (IP 64) for ATEX II 2D Ex tb IIIC T90°C Db
Ingress Protection (IP 67)

Housing Material
Die-Cast Aluminum

Sensor Tube Material
Stainless Steel 1.4404

Operating Pressure
232 psi

Special Version Operating Pressure
580 psi

Direct Current (DC) Supply Voltage
18 to 36 V

Power Supply
5 W

Approval
ATEX II 2G Ex db IIC T4 Gb
ATEX II 2D Ex tb IIIC T90 ºC Db
DVGW


Measuring Range

Low-Speed Air Flow (164 Feet Per Seconds (ft/s))
320 L/min
190 ft³/min

Standard Air Flow (304 Feet Per Seconds (ft/s))
600 m³/h
350 ft³/min

Maximum Air Flow (607 Feet Per Seconds (ft/s))
1195 m³/h
700 ft³/min

High-Speed Air Flow (735 Feet Per Seconds (ft/s))
1450 m³/h
850 ft³/min

Note for Air Flow
Reference conditions DIN 1945 / ISO 1217: 68 ºF, 14 psi

Low-Speed Argon (Ar) Flow (164 Feet Per Seconds (ft/s))
505 L/min
295 ft³/min

Standard Argon (Ar) Flow (304 Feet Per Seconds (ft/s))
935 m³/h
550 ft³/min

Maximum Argon (Ar) Flow (607 Feet Per Seconds (ft/s))
1870 m³/h
1100 ft³/min

High-Speed Argon (Ar) Flow (735 Feet Per Seconds (ft/s))
2265 m³/h
1330 ft³/min

Note for Argon (Ar) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Carbon Dioxide (CO2) Flow (164 Feet Per Seconds (ft/s))
320 L/min
185 ft³/min

Standard Carbon Dioxide (CO2) Flow (304 Feet Per Seconds (ft/s))
590 m³/h
345 ft³/min

Maximum Carbon Dioxide (CO2) Flow (607 Feet Per Seconds (ft/s))
1185 m³/h
695 ft³/min

High-Speed Carbon Dioxide (CO2) Flow (735 Feet Per Seconds (ft/s)
1430 m³/h
840 ft³/min

Note for Carbon Dioxide (CO2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Nitrogen (N2) Flow (164 Feet Per Seconds (ft/s))
295 L/min
175 ft³/min

Standard Nitrogen (N2) Flow (304 Feet Per Seconds (ft/s))
550 m³/h
320 ft³/min

Maximum Nitrogen (N2) Flow (607 Feet Per Seconds (ft/s))
1100 m³/h
645 ft³/min

High-Speed Nitrogen (N2) Flow (735 Feet Per Seconds (ft/s))
1330 m³/h
780 ft³/min

Note for Nitrogen (N2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Oxygen (O2) Flow (164 Feet Per Seconds (ft/s))
305 L/min
180 ft³/min

Standard Oxygen (O2) Flow (304 Feet Per Seconds (ft/s))
570 m³/h
335 ft³/min

Maximum Oxygen (O2) Flow (607 Feet Per Seconds (ft/s))
1140 m³/h
670 ft³/min

High-Speed Oxygen (O2) Flow (735 Feet Per Seconds (ft/s))
1380 m³/h
810 ft³/min

Note for Oxygen (O2) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Nitrous Oxide (N2O) Flow (164 Feet Per Seconds (ft/s))
315 L/min
185 ft³/min

Standard Nitrous Oxide (N2O) Flow (304 Feet Per Seconds (ft/s))
585 m³/h
345 ft³/min

Maximum Nitrous Oxide (N2O) Flow (607 Feet Per Seconds (ft/s))
1170 m³/h
690 ft³/min

High-Speed Nitrous Oxide (N2O) Flow (735 Feet Per Seconds (ft/s))
1420 m³/h
835 ft³/min

Note for Nitrous Oxide (N2O) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi

Low-Speed Natural Gas (NG) Flow (164 Feet Per Seconds (ft/s))
190 L/min
110 ft³/min

Standard Natural Gas (NG) Flow (304 Feet Per Seconds (ft/s))
355 m³/h
205 ft³/min

Maximum Natural Gas (NG) Flow (607 Feet Per Seconds (ft/s))
705 m³/h
415 ft³/min

High-Speed Natural Gas (NG) Flow (735 Feet Per Seconds (ft/s))
855 m³/h
500 ft³/min

Note for Natural Gas (NG) Flow
Setting to DIN 1343: 32 ºF, 14.7 psi


Flange

Flange Pipe Size
2 in

Flange Outer Pipe Diameter
60.3 mm

Flange Inner Pipe Diameter
53.1 mm

Dimension L (Flange)
18.7 in

Note for Dimension L (Flange)
Attention: Shortened inlet section. Please observe the recommended minimum inlet section (length = 15 x inner diameter) on site.

Dimension L1 (Flange)
10.83 in

Dimension H (Flange)
11.81 in

Dimension H1 (Flange)
8.98 in

Diameter D (Flange)
165 mm

Diameter K (Flange)
125 mm

Number of Diameter L (Flange)
8

Diameter L (Flange)
18 mm


Connection to Different Bus Systems Options
There are different options available for connection to modern Bus systems:
  • Ethernet interface (Modbus-TCP) / PoE
  • M-BUS
  • Modbus-RTU
  • Profibus DP interface (in process)
  • Profinet interface (in process)
  • HART (in process)


Special Measurement Technology Features
  • 4 values on the display: Flow, total consumption, velocity, temperature. Units freely adjustable
  • All measured values, settings such as gas type, inner diameter, serial number and so on can be accessed via Modbus-RTU
  • Comprehensive diagnostic functions readable on the display or remote access via Modbus such as calibration cycle, error codes, serial number
  • Notification in case of exceeding the calibration cycle
  • Standard version accuracy 1.5% of m.v. ± 0.3% of f.s.
  • Precision version accuracy 1.0% of m.v. ± 0.3% of f.s
  • Measuring span of 1 : 1000 (0.33 ft/s up to 735 ft/s)
  • Configuration and diagnosis via display, hand-held device PI 500, PC service software on-site
  • Gas type (air, nitrogen, oxygen, argon and so on) freely adjustable via PC service software or external device DS 400, DS 500, PI 500
  • Reference conditions ºC and PST / hPA freely adjustable
  • In-Situ adjustment, leak flow volume suppression
  • Pressure loss negligible


Special Mechanical Features
  • Robust impact-proof aluminum die cast housing for the outdoor area IP 67
  • All wetted parts made from stainless steel 1.4404
  • On request with DVGW approval for natural gas (up to 232 psi)
  • Pressure range up to 232 psi, special version up to 580 psi
  • Media temperature range up to 356 ºF (ATEX version up to 248 ºF)
  • No moveable parts, no wear
  • Sensor tip very robust, easy to clean
  • Housing rotatable, display rotatable by -356 ºF


Additional Information
The screwing with a centring device is designed such that the sensor is positioned accurately in the center when screwing it into the measuring section; furthermore, it enables an exact positioning in the flow direction. This eliminates unnecessary measuring faults.