Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > Kaeser Products > Rotary Screw Compressors > Direct Drive Up to 700 Horsepower (hp) Compressors > CSD Series Rotary Screw Air Compressors > Item # 72991  


Image

Item # 72991, CSD 100S T Model 100 Horsepower (hp) Nominal Motor Output T Version Rotary Screw Air Compressor
Web Price QUOTE

Screw compressors with superior efficiency

Kaeser's direct drive rotary screw compressors range from 25 hp - 650 hp and deliver outstanding performance. Kaeser uses oversized airends specifically selected to produce the required output in flow and pressure. Compared to compressors using small, high speed, gear-driven airends, the one-to-one drive provides significant savings. With Kaeser's one-to-one drive, the airend is directly connected to the motor via a maintenance-free coupling that eliminates transmission losses.





Financing  · Specifications  · Dimensions  · Additional Information  · Advantages  · Low Life Cycle Costs  · Equipment  · Add-On Refrigerated Dryer

Financing

Approve Payments
Finance with Approve Payments



Specifications

Brands
Kaeser Compressors

Model
CSD 100S T

Working Pressure
125 psi
175 psi
217 psi

Complete System Flow Rate at 125 Pound Per Square Inch (psi) Working Pressure
417 acfm

Complete System Flow Rate at 175 Pound Per Square Inch (psi) Working Pressure
340 acfm

Complete System Flow Rate at 217 Pound Per Square Inch (psi) Working Pressure
275 acfm

Maximum Positive Pressure at 125 Pound Per Square Inch (psi) Working Pressure
125 psi

Maximum Positive Pressure at 175 Pound Per Square Inch (psi) Working Pressure
175 psi

Maximum Positive Pressure at 217 Pound Per Square Inch (psi) Working Pressure
217 psi

Nominal Motor Output Power
100 hp

Compressed Air Connection Thread Size
2 in

Compressed Air Connection Thread Type
National Pipe Thread (NPT)

Sound Pressure Level
73 dBA

Weight at 125 Pound Per Square Inch (psi) Maximum Positive Pressure
3265 lb

Weight at 175 Pound Per Square Inch (psi) Maximum Positive Pressure
3272 lb

Weight at 217 Pound Per Square Inch (psi) Maximum Positive Pressure
3168 lb

Ambient Temperature
Up to +115 ºF


Dimensions

Width
85 in

Depth
44 in

Height
75 in


Additional Information
Our fluid-injected rotary screw compressors are the perfect choice for industrial compressed air applications. Not sure which model you need? We're happy to help you determine the right solution.


Advantages
  • Exceptional efficiency - IE3 and IE4 motors with premium efficiency performance provide additional energy savings.
  • Longer service life - Electronic thermal management dynamically controls the fluid temperature of our ASD - HSD series for increased energy efficiency. The ETM prevents internal condensation build up, eliminating a common cause of lubricant degradation.


Low Life Cycle Costs
Our comprehensive approach to life cycle cost management: Superior efficiency, easy operation, service-friendliness, and a global service and consulting network with fast response times.


Equipment

Complete Unit
  • Ready-to-run
  • Fully automatic
  • Super soundproofing
  • Vibration dampening
  • Powder-coated panels
  • Service-friendly design: External lubrication for fan motor and drive motor bearings
  • Easy access to all service points

Airend
  • Single stage with cooling fluid injection for optimal rotor cooling
  • Genuine KAESER rotary screw airend with the SIGMA Profile
  • 1:1 Direct drive

Drive
  • Directly coupled without gears
  • High-flex, maintenance-free coupling

Cooling Fluid and Air Circuit
  • Dry air filter
  • Inlet silencer
  • Pneumatic inlet and venting valves
  • Cooling fluid separator tank with three-stage separator system
  • Safety relief valve
  • Minimum pressure check valve
  • ETM electronic thermal

Heat Recovery (HR) (Option)
  • Optionally available with integrated fluid/water plate-type heat exchanger and additional fluid thermostatic valve
  • External connections

Integrated Refrigerated Dryer
  • Refrigerant compressor with energy-saving shut-down feature
  • CFC-free
  • R-513A refrigerant
  • Fully insulated
  • Hermetically sealed refrigerant circuit
  • Hot gas bypass control

Electric Motor
  • IE4 super premium efficiency motor
  • IP 55
  • Totally enclosed fan-cooled motor (TEFC)
  • Class F insulation for greater power reserve
  • Pt100 winding temperature transducer for motor monitoring
  • External bearing lubrication

Electrical Components
  • Control cabinet to IP 54
  • Control cabinet ventilation
  • Automatic wye-delta starter
  • Overload relays
  • Control transformer
  • Frequency converter for fan motor (CSD 100/125)
  • Siemens frequency converter with synchronous reluctance motor with IES2 provides improved efficiency to the entire drive (SFC models)

Sigma Control 2
  • "Traffic-light" LED indicators show operational status at a glance
  • Easy to read display
  • 30 selectable languages
  • Soft-touch keys with icons
  • Fully automated monitoring and control
  • Dual, Quadro, Vario, Dynamic, and Continuous control modes included as standard
  • Interfaces: Ethernet
  • Additional optional communications modules for: Profibus DP, Modbus, Profinet, DeviceNet, EtherNet/IP
  • SD card slot for data-logging and updates
  • RFID reader
  • Web server


Add-On Refrigerated Dryer

Refrigerated Dryer
ABT 125

Power Consumption
2.1

Pressure Dew Point
37 ºF

Refrigerant
R-513A

Global Warming Potential
631

Refrigerant Volume
3.64 lb

Refrigerant Mass as CO2 Equivalent
1 t