Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > Compressed Air Gas Monitors & Instrumentation > Dew Point > FA 510/515 Dew Point Sensors > Item # 0699 0515  


Image

Item # 0699 0515, FA 515 Dew Point Sensor for Adsorption Dryers
Web Price QUOTE

FA 515 dew point sensor for adsorption dryers -112 to 68 ºFtd incl. factory certificate, 4…20 mA analog output (2-wire connection) or Modbus-RTU interface





Financing  · Specifications  · Dimensions  · Typical Applications  · Recommendation  · Advantages  · Special Features  · Readable Via Modbus  · Options

Financing

Approve Payments
Finance with Approve Payments



Specifications

Measuring Range (Atmospheric Pressure)
-112 to 68 ºF
-4 to 112 ºF

Accuracy (±) at 122 to -4 Degree Fahrenheit (ºF) Temperature
1.8 ºF

Accuracy (±) at -4 to -58 Degree Fahrenheit (ºF) Temperature (Atmospheric Pressure)
3.6 ºF

Accuracy (±) at -58 to -112 Degree Fahrenheit (ºF) Temperature (Atmospheric Pressure)
5.4 ºF

Pressure Range
-14 to 725 psi

Pressure Range (Special Version)
Up to 7252 psi

Direct Current (DC) Voltage
10 to 36 V
24 V

Protection Class
IP 66

Electromagnetic Compatibility (EMC)
In According with DIN EN 61326-1

Operating Temperature
-4 to 158 ºF

Connection
M12

Number of Connection Pins
5

Personal Computer (PC) Connection
Modbus-RTU interface (RS 485)

Analog Output
4 to 20 mA = -112 to 68 ºFtd
4 to 20 mA = -4 to 122 ºFtd
FA 510: 4 to 20 mA (3-wire)
FA 515: 4 to 20 mA (2-wire)

Burden for Analog Output
500 Ω

Screw-In Thread
G 1/2 in. Stainless Steel

Optional Screw-In Thread
1/2 in. National Pipe Thread (NPT)
5/8 in. Unified National Fine (UNF)

Via Service Software (Choose Units)
% RH
lb/CF
mg/CF
ºFtd
ppm V/V

Scaling Current Change
4 to 20 mA


Dimensions

Diameter
11 in

Approximate Length
5.1 in


Typical Applications
  • Dew point measurement in the compressed air after adsorption dryer, membrane dryer, refrigeration dryer
  • Residual moisture/dew point measurement in gases such as oxygen, nitrogen, argon
  • Residual moisture/dew point measurement after granulate dryers in the plastics industry


Recommendation
Mounting with standard measuring chamber for compressed air up to 232 psi


Advantages
Easy installation via quick coupling


Special Features
  • Extremely stable in the long term
  • Analog output 4...20 mA for dew point
  • Condensation-resistant
  • Quick adaption time
  • Pressure-tight up to 5076 psi (special version)
  • NEW: Modbus-RTU interface
  • NEW: Higher resolution of sensor signal due to the improved evaluation electronics
  • NEW: Sensor diagnosis on site with a portable device or CS Service Software


Readable Via Modbus
  • Pressure dew point [ºFtd]
  • Temperature [ºF]
  • rel. humidity [% RH]
  • abs. humidity [g/m³]
  • Degree of humidity [g/kg]
  • Moisture content V/V [ppmV/V]
  • Partial vapor pressure [hPa]
  • Atmospheric dew point [ºFtd.atm]


Options
Z699 0511, 5/8 Inch (in) Unified National Fine (UNF) Connection Thread
Z699 0514, Special Scaling
Z699 0515, 5076 Pounds Per Square Inch (PSI) Maximum Pressure
Z699 0516, 72551 Pounds Per Square Inch (PSI) Maximum Pressure
Z699 0517, Surface Condition