Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Toll Free: 855.979.8312
Phone: 813.626.8177
Fax: 813.628.0187
Email: [email protected]
Website: www.compressedairsystems.com
Print Back
If you're like most shop air compressor owners, you need a reliable source of clean, dry air that you don't have to think about on a daily basis. You have enough to do without designing and installing a new compressed air system. That's why KAESER offers the AIRTOWER - a more affordable but rugged shop compressor for any light industrial application including woodworking, machine shops, metal fabrication, and all sorts of vehicle maintenance and repair.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Brands

 N/A Kaeser Compressors

Model

 N/A Airtower 4C

Working Pressure

 N/A 125 psi160 psi217 psi

Complete System Flow Rate at 125 Pound Per Square Inch (psi) Working Pressure

 N/A 16 acfm

Complete System Flow Rate at 160 Pound Per Square Inch (psi) Working Pressure

 N/A 13 acfm

Complete System Flow Rate at 217 Pound Per Square Inch (psi) Working Pressure

 N/A 9 acfm

Maximum Positive Pressure at 125 Pound Per Square Inch (psi) Working Pressure

 N/A 125 psi

Maximum Positive Pressure at 160 Pound Per Square Inch (psi) Working Pressure

 N/A 160 psi

Maximum Positive Pressure at 217 Pound Per Square Inch (psi) Working Pressure

 N/A 217 psi

Nominal Motor Output Power

 N/A 4 hp

Receiver Volume

 N/A 56.8 gal

Compressed Air Connection Thread Size

 N/A 3/4 in

Compressed Air Connection Thread Type

 N/A National Pipe Thread (NPT)

Sound Pressure Level

 N/A 70 dBA

Weight

 N/A 628 lb

Dimensions

Width

 N/A 24 in

Depth

 N/A 39 in

Height

 N/A 58 in

Advantages

Advantages

 N/A
  • Ready to run - Install an AIRTOWER in no time at all. Simply connect to the power supply and compressed air distribution network and that's it-you're ready to go!
  • Protection from corrosion damage - Thanks to the integrated refrigerated dryer, the AIRTOWER package delivers a reliable supply of dry air that protects your tools and equipment from corrosion damage.
  • Simple maintenance - All maintenance and service points are easily accessible after removing the lightweight roto-molded polyethylene enclosure. The electronic condensate drain can be inspected via an opening on the cover.

Equipment

Complete Unit

 N/A
  • Ready-to-run
  • Fully automatic
  • Super sound-proofed
  • Vibration-dampened
  • Double-skinned roto-molded polyethylene enclosure
  • Easy access to all service points

Airend

 N/A Sigma Profile rotors use approximately 10 to 20 percent less energy than conventional rotors of the same flow capacity.

Belt Drive

 N/A
  • Maintenance-free elastic belt
  • No re-tensioning

Fluid and Air Flow

 N/A
  • Honeycomb dry air filter
  • Inlet with check valve
  • Pneumatic venting valve
  • Cooling fluid tank with separately installed separator cartridge
  • Safety relief valve
  • Minimum pressure / check valve
  • Micro-filter in the cooling fluid circuit

Cooling

 N/A
  • Air-cooled
  • Aluminum cooler for cooling fluid with separate fan motor
  • Second fan on drive motor shaft
  • Automatic warm-up control (only active at very low loads)

Refrigerated Dryer Information

 N/A
  • CFC-free R-513A refrigerant
  • Control cabinet to IP 54
  • Overcurrent trip
  • Control transformer

Electric Motor

 N/A
  • Premium Efficiency motor (IE3)
  • IP 54
  • Insulation class F for greater power reserve

Electrical Components

 N/A
  • Control cabinet to IP 54
  • Automatic wye-delta starter (above 4 hp)
  • Overload relay
  • Control transformer

Receiver

 N/A
  • Internally coated
  • Electronically controlled, zero-loss compressed air condensate drain

Sigma Control 2

 N/A
  • "Traffic-light" LED indicators for at-a-glance operational control
  • Easy to read display
  • 30 selectable languages
  • Soft-touch keys with icons
  • Fully automatic monitoring and control
  • Dual, Quadro, Vario, and Continuous control included as standard
  • Interfaces: Ethernet
  • Additional optional communications modules for: Profibus DP, Modbus, Profinet, and DeviceNet, EtherNet/IP
  • SD card slot for data-logging and updates
  • RFID reader
  • Web server

Add-On Refrigerated Dryer

Refrigerated Dryer

 N/A CT 4

Power Consumption

 N/A 0.3

Pressure Dew Point

 N/A 37 ºF

Refrigerant

 N/A R-513A

Global Warming Potential

 N/A 631

Refrigerant Volume

 N/A 0.38 lb

Refrigerant Mass as CO2 Equivalent

 N/A 0.1 t

Hermetic Refrigeration Circuit

 N/A Yes

Additional Information

N/A The AIRTOWER is a quality alternative to piston and light duty rotary screw compressors.

AIRTOWERS are completely assembled and their compact design saves you precious floor space. They arrive ready for installation, saving you a lot of time and expense.