Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
The AIR-SAVER 1" is installed in the compressed air line after the air receiver. The AIR-SAVER 1" opens and closes the air supply to the factory, based on customer specific working shifts.

A typical compressed air system has air loss through pipe work connections, leaking float type drains, etc.

The AIR-SAVER 1" will open the ball valve at the beginning of a working shift and close the ball valve when the working shift is over. From that point on, all compressed air will remain in the air receiver until the next working shift, rather than being lost through leakages.

The clever and versatile programming feature allows for customer specific settings and is totally adaptable to the working hours of each individual factory.

The AIR-SAVER 1" can be installed in all pipe line systems up to 1". Remote switching kits are available to operate the AIR-SAVER 1" from a distance.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Brands

 N/A Jorc

Industry Standards/Certifications

 N/A CE NEN - EN - ISO 9001:2015 Certified RoHS

Technical Specification

Pressure Range

 N/A 0 to 230 psi0 to 16 bar

Opening/Closing Duration Per 90 Degree (º)

 N/A 30 seconds

Medium Temperature

 N/A 34 to 212 ºF1 to 100 ºC

Ambient Temperature

 N/A 34 to 140 ºF1 to 60 ºC

Illuminated Liquid Crystal Display (LCD)

 N/A Battery Life Indicating Day Time Valve Status

Programmable Options

 N/A Maximum 100 Switching Point to be Distributed Over 1-7 days Week Planner

Inlet/Outlet Connections

 N/A 1 in. National Pipe Thread (NPT) British Standard Pipe (BSP)

Valve Housing Material

 N/A Brass Nickel Plated

Serviceable Valve

 N/A true

Manual Override

 N/A true

Remote Controllable

 N/A true

Environmental Protection

 N/A National Electrical Manufacturers Association (NEMA13) (Ingress Protection (IP54))

Supply Voltage Options

Alternating Current (AC) Voltage

 N/A 115 V230 V

Frequency

 N/A 50 Hz60 Hz

Note for Supply Voltage Options

 N/A Please Indicate

Commercial Benefits

Commercial Benefits

 N/A
  • At least one air receiver’s worth of compressed air savings per day
  • No unnecessary compressor start-up during periods when compressed air is not required
  • Compressor, dryer and filter activities are reduced during factory closing hours
  • Possibility to shut of parts of the pipe line system where compressed air is not needed continuously
  • Language selection feature (English, German, Spanish, French and Dutch)
  • Each individual day can be programmed according to specific working day shift requirements
  • Time programmed or remote controlled
  • Manual valve opening and closing possible, in case of a power failure
  • Consult Jorc for private labelling options

Technical Advantages

Technical Advantages

 N/A
  • Microprocessor controlled (7 day program feature - multiple cycles possible each day)
  • Extended programming features relating to valve open and close cycles (100)
  • Slow ball valve rotation 90° in 30 seconds to avoid “water hammer” when opening or closing
  • Stainless steel ball, valve is nickel plated brass
  • Battery saves the installation set-up during power failure
  • Battery life indication in the display
  • Compact design - Easy to install

Note

Note

 N/A Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, Jorc reserves the right to revise information without notice and without incurring any obligation.