Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum Street
Tampa, FL 33619-2658

Compressed Air Systems, Inc. - Central Florida
11609 S Orange Blossom Trail
Orlando, FL 32837

Toll Free: 800.626.8177 • Phone: 813.626.8177 • Fax: 813.628.0187
Email: [email protected] • Web Address:www.compressedairsystems.com
All Categories > POGO Hopper Car Gate Opener > Item # OHGO-5E  


Item # OHGO-5E, Electric Hopper Car Gate Openers
Web Price QUOTE

Effortless Hopper Gate Opening

The POGO Electric is designed to be suspended from an I or H beam. A telescoping shaft equipped with a special heat treated bit is inserted into the capstan. Once inserted the drive motor will open or close the hopper gate quickly and smoothly. Heavy duty jack screws allow the operator to accurately raise and lower the shaft to align with the capstan. The whole machine rolls effortlessly along the I or H beam to allow easy alignment. A double swivel plate at the top of the machine allows the operator to rotate the telescoping shaft out of the way of the locomotive when spotting cars.





Financing  · Specifications  · Performance  · Travel Ranges  · Beam Size  · Beam Placement  · Electrical Requirements  · Operator Flexibility  · Powerful and Dependable

Financing

Approve Payments
Finance with Approve Payments



Specifications

Trolley Center Size
20 1/8 in

Minimum Clearance from Centerline when Rotated
19 5/8 in


Performance

Adjustable Torque
Up to 2000 lb·ft

Rotation Speed
18 rpm

Weight
1530 lb

Operator Range
10 ft


Travel Ranges

Adjustable Up/Down Travel Range
36 in

Telescoping Shaft In/Out Configurable Range
Up to 44 in

Rotation
360 º

Left/Right
Full Length of Beam


Beam Size

Beam Flange Width
3 1/4 to 8 in

Minimum Beam Height
4 in

Machine Weight
1530 lb


Beam Placement

Height Above Finished Floor
144 in

Centerline Offset from Capstan
45 to 115 in


Electrical Requirements

Voltage
460 V

Phase
3

Power Supply Frequency
60 Hz

Minimum Recommended Breaker

20 A


Operator Flexibility
The POGO Electric has been designed so that the operator can perform all functions from a standing position saving them from the backbreaking task of manually opening hopper gates. A pendant control with a 10 ft cord is provided to allow the operator to move freely about the machine.


Powerful and Dependable
Power is delivered from a 5 hp TEFC electric motor through a helical-bevel reducer providing a massive amount of torque. Separate TEFC motors drive the telescoping shaft and jack screws. The telescoping shaft is designed to be easily removable for service. All wear areas are protected with bellows or covers for harsh environments. An explosion proof option is also available.