The New Reliant™ RS45 - The Most Powerful, Lightweight, Air Compressor in its Class.

55 % Lighter. Quieter Operation. More Air Power Than the Competition.

Vanair® once again is listening and meeting the demands of the marketplace with the introduction of the new Reliant™ RS45 air compressor; the most powerful, lightweight system in its class. At 55 % less weight than its predecessor, the RS45's featherweight rust-proof aluminum canopy reduces truck weight and fuel consumption. Providing an impressive 45 cfm and 150 psi of on-demand air power at 100 % duty cycle, the RS45 has the highest cfm rating in its class.

Ratings are approximate and are based on 120 ºF hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details.

• Below 0 ºF Requires Heating Pads

• Integrated Cooler Reduces Heat in Truck Hydraulic System

• Quiet - Only 74 dBA at 7 meters

• Rotary Screw Air Compressor
• Bolt-On Electric Inlet Valve
• Integral Air-to-Oil Separator Tank

• Hydraulic Oil In – 1/2" 37 Degree JIC
• Hydraulic Oil Out - 5/8" 37 Degree JIC
• Open Center or Closed Center
• Hydraulic Case Drain

• Conveniently Located and Easy to Read or Remote Mountable
• LED Electronic Display for Temperature, Pressure, and Machine Hours

• Air Pressure Relief Safety Valve
• Hydraulic Oil Pressure Relief Valve
• Automatic Blow-Down on Shutdown
• High-Temperature and High-Pressure Compressor Shutdown
• Oil Fill Plug Safety Relief

• Reversible Hinged Hood and Oil Fill Service Access Panel for Easy Accessibility
• JIC Fittings on Front of Machine for Hydraulic and Air Connections for Convenience

• Lightweight Powder-Coated Aluminum Sheet Metal Enclosure
• Single Point Lifting Bail

• Cold Weather Package with Thermal Valve
• 20 - 60 Gallon Air Reservoirs
• Aftercoolers
• Air Hoses
• Air Tools
• Hose Reels and Fittings
• OSHA Safety Valve (Velocity Fuse)
• Post Drivers
• Service/Control Line Moisture Separators
• Tool Oiler/Lubricator
• Service Airline De-Icer
• Filter Lubricator Regulator (FLR) 1/2"

All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).

Lifetime Warranty on Air End

Advanced sound attenuation technology has significantly reduced the sound level on the machine. Quieter, lighter and more powerful, the RS45 will meet your toughest challenges out in the field.

Cold Weather Package

Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligation.