Compressed Air Systems, Inc.9303 Stannum Street
Tampa, FL 33619-2658
Toll Free: 855.979.8312
Phone: 813.626.8177
Fax: 813.628.0187
Email: [email protected]
Website: www.compressedairsystems.com
Compressed Air Systems, Inc.
| Items |
 0695 0550 VA 550 Insertion Type Flowmeter Web Price QUOTE
|
 0553 0108 5 Meter (m) Length Connection Cable Web Price QUOTE
|
 0553 0109 Connection Cable for 32.81 Feet (Ft) Length Probes with Open Ends Web Price QUOTE
|
0553 2503 16 Feet (ft) Length Ethernet Connection Cable Web Price QUOTE
|
0553 2504 32 Feet (ft) Length Ethernet Connection Cable Web Price QUOTE
|
|||||
| Description |
Flow sensor for installation in existing compressed air or gas line of 3/4" to 40" Housing rotatable, display 180º rotatable (on the head). Settings can be modified via display, flow meter can be reset |
Connection cable for probes 5 m, with open ends | Connection cable for probes 32.81 ft with open ends | Ethernet Connection Cable Length 16 Ft, M12 Plug X-coded (8 Pin) To Rj 45 Plug | Ethernet connection cable length 32 ft, M12 plug x-coded (8 pin) to RJ 45 plug | |||||
| Approve Payments |
Finance with Approve Payments |
|||||||||
| Measuring Range | Up to 164 ft/s, Low-Speed Version Up to 304 ft/s, Standard Version Up to 607 ft/s, Maximum Version Up to 735 ft/s, High-Speed Version | |||||||||
| Note for Measuring Range |
Measuring range SCFM for different pipe diameters and gases All measured values related to DIN 1343 standard conditions 0º and 1013 mbar ex works. |
|||||||||
| Accuracy | ± 0.3% of Full Scale (F.S.) ± 1.5% of Measured Value (M.V.) | |||||||||
| Accuracy on Request | ± 1.0% of Measured Value (M.V.) ± 0.3% of Full Scale (F.S.) | |||||||||
| Accuracy Indications | Relative to Ambient Temperature 71.6 ºF +2 ºF, System Pressure 87 psi | |||||||||
| Repeatability | 0.25% of Measured Value (M.V.) in Case of Correct Mounting (Mounting Aid, Position, Inlet Section) | |||||||||
| Measuring Principle | Thermal Mass Flow Sensor | |||||||||
| Response Time | t 90 <3 sec | |||||||||
| Operating/Ambient Temperature Range | -4 to 158 ºF | |||||||||
| Media Temperature Range | -4 to 356 ºF | |||||||||
| Media Temperature Range (ATEX Version) | -4 to 248 ºF | |||||||||
| Adjustment Possibilities via Display, External Hand- Held Device PI 500, PC Service Software, Remote Diagnosis | Nm³/h, Nm³/min, Nl/min, l/s, ft/min, cfm, kg/h, kg/min, inner diameter, reference conditions ºC/ºF, mbar/hPa, zero point correction, leak flow volume suppression, scaling analog output 4...20 mA, pulse/alarm, error codes etc. | |||||||||
| Standard Outputs | 1 x 4 to 20 mA Analog Output (Electrically Not Isolated) Pulse Output RS 485 (Modbus-RTU) | |||||||||
| Optional Outputs | 2 x 4 to 20 mA Active HART M-Bus Mod- bus TCP Profibus DP Profinet | |||||||||
| Burden | <500 Ω | |||||||||
| Additional Average Value Calculation | For all parameters freely adjustable from 1 minute up to 1 day, e. g. 1/2 hours average value, average day value | |||||||||
| Protection Class | Ingress Protection (IP 64) for ATEX II 2D Ex tb IIIC T90ºC Db Ingress Protection (IP 67) | |||||||||
| Housing Material | Die-Cast Aluminum | |||||||||
| Sensor Tube Material | Stainless Steel 1.4404 | |||||||||
| Screw-In Thread | G 1/2 in. (International Organization for Standardization (ISO 228)) National Pipe Thread (NPT) 1/2 in. PT 1/2 in. R 1/2 in. | |||||||||
| Operating Pressure | 232 psi | |||||||||
| Special Version Operating Pressure1 | 580 psi | |||||||||
| Direct Current (DC) Supply Voltage | 18 to 36 V | |||||||||
| Power Supply | 5 W | |||||||||
| Approval | ATEX II 2G Ex db IIC T4 Gb ATEX II 2D Ex tb IIIC T90 ºC Db DVGW | |||||||||
| Advantages of Optical Keys | The sensor can also be configured in the ATEX area, without the housing needing to be opened. | |||||||||
| Special Measurement Technology Features |
|
|||||||||
| Special Mechanical Features |
|
|||||||||
| Connection to Different Bus Systems Options |
There are different options available for connection to modern Bus systems:
|
|||||||||
| Additional Information |
Easy mounting/dismounting of VA 550 under pressure - without disconnection of the line - without emptying the line If there is no suitable measuring site with 1/2" ball valve, there are two simple possibilities to set up a measuring site: A Weld on a 1/2" screw neck and screw on a 1/2" ball valve B Mount spot drilling collar including ball valve By means of the drilling jig, it is possible to drill under pressure through the 1/2" ball valve into the existing pipe. The drilling chips are collected in a filter. Then the probe can be mounted. |
|||||||||
|
||||||||||
