Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
Engine Driven Reciprocating Air Compressors with Welder and Generator
Unit of Measure
Items Engine Driven Reciprocating Air Compressors with Welder and Generator
C130GEH34-GWE
13 hp Power Honda Engine Driven Reciprocating Air Compressor with Welder and Generator 		19 cfm Gas Engine Air Compressors with 5500 W Generator and 250 A Welder
C140GEC34-GWE
30 gal Tank Capacity and 19 cfm Kohler Electric Start Gas Engine Air Compressor 		Engine Driven Reciprocating Air Compressors with Welder and Generator
C180GEH34-GWE
18 HP Power Honda Engine Driven Reciprocating Air Compressor with Welder and Generator
Air Flow at 175 psi N/A 19 cfm N/A 19 cfm N/A 22 cfm
Tank Size N/A 30 gal N/A N/A 30 gal
Power N/A 13 hp N/A 14 hp N/A 18 hp
Engine Start N/A Electric N/A N/A Electric
Length N/A 46 in
Width N/A 24 in N/A 26 in N/A 24 in
Height N/A 42 in
Weight N/A 550 lb N/A 550 lb N/A 600 lb
Generator Power N/A 5500 W N/A 5500 W N/A 6000 W
Welder Current N/A 250 A N/A 250 A N/A 300 A
Engine N/A Honda Gas N/A N/A Honda Gas
Compressor Type N/A Reciprocating N/A N/A Reciprocating
Mounting N/A N/A Tank N/A
Tank Capacity N/A N/A 30 gal N/A
Tank Orientation N/A N/A Horizontal N/A
Drive Engine N/A N/A Kohler Electric Start N/A
Stages N/A N/A Two N/A
Pump Material N/A N/A Heavy-Duty Cast Iron N/A
Outlet Voltage N/A N/A 110 V220 V N/A
Current Drawn at 120 V N/A N/A 41 A N/A
Current Drawn at 240 V N/A N/A 20 A N/A
Pump Warranty (Optional) N/A N/A 5 years N/A
Industry Standards/Certifications N/A N/A ASME N/A
Features N/A
  • Industrial grade gas engine
  • Industrial grade welder/generator
  • Heavy-duty industrial compressor pump
  • Belt guard after cooler
  • Battery mounted and wired
  • Electric start engine
  • Vibration pads
  • Stainless steel flex lines
  • Automatic tank drain
  • Freight pre-paid in lower 48 states and southern Canada
 		N/A
  • Heavy-duty two stage solid cast iron pump
  • Disk and spring valves
  • Bearings on both ends of the crank shaft
  • Centrifugal unloader
  • Needle bearings, and inserts on rods
  • Industrial grade gas engine
  • ASME tested powder coated steel tank
  • 2 grove B width motor pulley
  • Access to compressor valves without compressor head removal
  • Pilot valve continuous operation
  • Fully enclosed belt guard
  • Full saddle mounting feet instead of pegged mounting feet
  • Alternator on driven engine
  • Belt guard after cooler
  • On-board battery mounted and wired (No wiring to the front of the truck needed)
  • Automatic tank drain
  • Vibration pads
  • Freight prepaid in the 48 states and southern Canada
 		N/A
  • Industrial grade gas engine
  • Industrial grade welder/generator
  • Heavy-duty industrial compressor pump
  • Belt guard after cooler
  • Battery mounted and wired
  • Electric start engine
  • Vibration pads
  • Stainless steel flex lines
  • Automatic tank drain
  • Freight pre-paid in lower 48 states and southern Canada
Options N/A
  • Heavy-duty marine grade battery
  • Filter regulator
  • Front mount battery
  • Engine control extension
 		N/A N/A
  • Heavy-duty marine grade battery
  • Filter regulator
  • Front mount battery
  • Engine control extension
Note N/A N/A No Start Up Kit Required N/A Units above 14 hp require and auxiliary fuel cell