Print Back

The Stacked G30 was mindfully designed with one goal: to easily fit in modern service trucks. The new G30 is stacked vertically, which significantly reduces the amount of vehicle space it requires. With a footprint of just 2.5 square feet on the truck, the Stacked G30 is 59% smaller than comparable air compressors.

VMAC’s Stacked G30 weighs in at under 210 lb., making it 52% lighter than comparable air compressors. Add more tools & equipment to your truck or get better fuel economy.

VMAC G30s include a 30 CFM rotary screw air compressor designed to produce full air power, so you don’t need a large air receiver tank. Get jobs done without interruption.

Highlights of VMAC’s new Stacked G30 gas drive air compressor:

•             VMAC Part #: G300004

•             Compressor Output: 30 CFM @ 100 psi (150 psi max)

•             Compressor Type: Belt-driven, 100% duty cycle, VMAC oil-injected rotary screw

•             Engine: Honda GX390 air cooled 4-stroke OHV with electric start

•             Battery (included): ACDelco 12V, 460 CCA, 575 CA

•             Cold Climate Kit (included): Heats up the G30 on the way to the jobsite; 800W Power Inverter required

•             Dimensions: 20” (l) x 18” (w) x 38” (h)

•             Weight: ~210 lb

•             Warranty: Two years on all major components; VMAC air-ends are covered by VMAC’s Lifetime Limited Warranty; Honda engine is covered by Honda’s 36-month Limited Warranty



Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Air Compressor

Duty Cycle

N/A 100 %

Rated Air Capacity at 100 psi (Maximum 150 psi)

N/A 30 cfm

Compressor Type

N/A Belt-Driven

Air Compressor Warranty

N/A VMAC Lifetime Warranty (Limited)

Engine

Engine Start

N/A Electric

Engine Power

N/A 11.7 hp

Engine Type

N/A Gasoline OHV Engine

Emission Compliance

N/A CARB EPA

Engine Warranty

N/A 3 year Honda warranty

Dimensions

Height

N/A 38 in

Width

N/A 18 in

Length

N/A 20 in

Specifications

System Weight (Wet)

N/A 210 lb

Mounting Plate Width

N/A 10.75 in

Mounting Plate Length

N/A 16.78 in

Noise Level at 20 ft

N/A 81 dB

Fuel Tank Capacity

N/A 1.6 gal

Safety Features

Safety Features

N/A
  • Lightweight
  • Compressor Thermal Protection Circuit
  • Automatic Rapid Blow-Down Valve on Tank
  • 200 psi Pressure Relief Valve
  • Low engine oil pressure shutoff

System Components

Air Compressor

N/A VMAC® Oil-Injected Rotary Screw

WHASP Tank

N/A Patent pending integrated oil/air separator and air/oil cooler

Throttle Control

N/A Controlled by system air pressure, idles down/up automatically with air demand

Engine

N/A Honda GX390 Air Cooled 4-stroke OHV with Electric Start

Drive System

N/A Aluminum Belt-Guard Auto-Tensioned Serpentine Belt Clutchless Gearless

Optional Equipment

Remote Control Panel (A500042)

N/A Remote panel with 10 foot extension for key switch, hour meter, and choke

Continuous Duty Air Power

Continuous Duty Air Power

N/A The G30 Stacked provides you with continuous air flow of 30 CFM to get most day-to-day jobs done - only faster. The compressor is rated 100% duty-cycle which means it never stops producing the air that is required. Now you can seamlessly run your air tools without any interruptions and any need to wait for your compressor to fill a receiver tank. Focus on your work and leave all else to the G30 gas drive air compressor.

Un-Matched Size and Weight

Un-Matched Size and Weight

N/A The compressor is built from high quality light-weight aluminum components that makes it the lightest gas drive compressor available. The G30 is half the weight of competitive reciprocating models on the market. Also, its efficient design results in a small footprint that provides more room for your tools and other necessary equipment, and allows the compressor to easily fit on the side pack of a service body.

Backed by a Life Time Warranty

Backed by a Life Time Warranty

N/A VMAC® strives to provide the best warranty service in the industry to give you the peace of mind you need. Specifically, the G30 is supported by VMAC's Lifetime Warranty (Limited) on the air end and Honda's 3-Year warranty on the engine.

Did You Know?

Did You Know?

N/A By reducing the weight on your service truck by 200 lbs, you may be able to avoid the watchful eye of DOT regulations and save as much as 4% on your fuel costs.

Rotary Screw Quick Facts

Rotary Screw Quick Facts

N/A
  • Powerful 100% duty cycle means you can fill a tractor trailer tire in 180 seconds.
  • Rotary screw compressors have a long history of superior performance and durability.
  • A drier, cooler option over reciprocating compressors, the rotary screw compressor makes less unwanted heat and moisture in the system.
  • Smooth air delivery eliminates the need for large receiver tanks in most applications.

About VMAC®

About VMAC®

N/A Established in 1986, VMAC® began by designing jet engines for the Military and has now grown into a global leader in the manufacturing of mobile rotary screw air compressors with a network of 400 dealers.