Print Back
Chilled water is used in a wide range of applications to cool or cure anything from plastic injection molded parts to food ingredients. Oftentimes, production quality can be increased and time decreased through use of closed loop cooling systems.

The advanced nano C1 industrial process chillers benefit from the experience of a design that has been perfected over 50 years and repeatedly proven through tens of thousands of units in operation around the world. Designed together with industrial users, these chillers have stood the test of time in virtually every industry and application.
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Water Inlet & Outlet NPT

N/A 1 1/2 in

Thread Type

N/A National Pipe Thread (NPT)

Cooling Capacity

N/A 73702 Btu/hr6.1 tons

Total Installed Power

N/A 10.5 kW

Water Pump Power

N/A 1.5 hp

Tank Capacity

N/A 42 gal

Dimension A

N/A 50 in

Dimension B

N/A 39 in

Dimension C

N/A 81 in

Refrigerant Type

N/A R410A

Minimum Inlet Water Temperature

N/A 32 ºF

Maximum Inlet Water Temperature

N/A 86 ºF

Minimum Outlet Water Temperature

N/A 32 ºF

Maximum Outlet Water Temperature

N/A 68 ºF

Minimum Ambient Temperature

N/A 23 ºF

Maximum Ambient Temperature

N/A 108 ºF

Shipping Weight

N/A 1078 lb

Power Supply

Power Supply Voltage

N/A 460 V

Power Supply Phase

N/A 3

Power Supply Frequency

N/A 60 Hz

Additional Information

Additional Information

N/A Leading edge technology and hundreds of years of experience…nano-purification solutions, your world-class manufacturer of state-of-the-art compressed air and gas solutions and process cooling equipment to industry.

Our commitment at nano is to work alongside our customers and provide unique solutions with the highest quality products to solve your specific challenges.

A wealth of experience and leading edge products are only part of the equation. nano recognize that world-class customer service is the most important component to any successful business.

Experience. Customer. Service… nano

Improved productivity & reduced costs

Process chillers are used in a variety of industrial applications to improve processes, reduce operating costs and increase productivity. Utilization of process chillers is becoming increasingly prevalent due to more stringent environmental water quality standards.

nano realize the importance of chilled water in industry and have developed the C1 line of precision controlled industrial process chillers to meet the increasing demand for high quality complete packaged solutions which meet various industrial applications.

The C1 operates in a closed circuit (open circuit optional), offering precise water temperature control and rapid response to changes in ambient and thermal load. This design also eliminates the waste, corrosion and bacterial growth associated with open circuit systems.

In addition, energy efficient and reliable compressors combined with a unique, oversized, patented, NO FROST in-tank evaporator provide the lowest operating costs available on the market today.

Design

Design

N/A Our experienced team of design engineers are always looking for new and unique technologies and products to bring you the highest level of performance and lowest overall operating cost.

Research and Development

Research and Development

N/A Our R&D team endeavors to provide solutions that go beyond developing an existing product. They are continually researching new technologies which can provide unique advantages over competitive offerings.

Manufacture

Manufacture

N/A The reliable and energy saving nano C1 industrial process chillers are manufactured in a state of the art facility to the highest standards of build quality to ensure reliability and high levels of performance.

Benefits - Get More for Your Money

Optimum Energy Efficiency

N/A lower electricity consumption compared to other machines on the market

Quality Components

N/A CAREL microprocessor, Copeland Scroll™ compressors

Easy to Install

N/A adapts to any installation constraints, both inside and outside

Space Saving Design

N/A fully packaged into a simple compact design, NCS will fit into the smallest spaces

Easy Start-up

N/A fully integrated packaged solution with expansion tank and bypass

Total Accessibility

N/A All panels can be removed to facilitate maintenance

Environmentally Friendly

N/A closed water circuit, cycling chiller using environmentally friendly refrigerant boasts lowest electricity consumption on the market

Manufacturing Quality

N/A Meeting strict ISO 9001 certified specifications

nano chillers - C1 in detail

Air-cooled Condenser

N/A Fitted with axial cooling fan with balanced aluminum blades and an air-cooled condenser in copper pipes and aluminum vanes. Reduces noise levels and improves ventilation air flow

CAREL Microprocessor

N/A The CAREL digital microprocessor continuously indicates water outlet temperature, operating instructions and various adjustable parameters and alarms

Integrated Bypass

N/A An integral centrifugal pump mounted within the chiller enclosure and a storage tank to avoid the risk of short cycles (models NCS 0031 to 1504 US). The standard adjustable bypass valve and integrated pressure gauge allows the water supply flowing out of the unit to be regulated

NO FROST Evaporator

N/A Patented tube in flexible shell heat exchanger is integral to the buffer vessel and protects against damage which can occur with improper setup or maintenance (1 external shell, 2 buffer tank, 3 flexible shell, 4 gas distributor, 5 feeding circuits, 6 ret

Ventilation Grill

N/A Includes a standard cleanable mesh panel filter to protect condenser

Robust Construction

N/A Aluminum sections and panels in plastic coated galvanized steel all mounted on an epoxy coated steel structural base (aluminum or stainless steel panels available as option)

Energy Efficient & Reliable Compressor

N/A C1 features Copeland Scroll™ compressors as standard on models NCS 0015 to 1504 US. Scrolls minimize power consumption, noise, vibration and moving parts while maximizing reliability and resistance to liquid refrigerant returns

Integral Pump

N/A Integrated centrifugal pump standard on models NCS 0031 to 1504 US

Typical Configurations

Closed Circuit Installation (Standard)

N/A Expansion tanks are required for all closed circuit installations. When multiple chillers are installed in parallel, the expansion tanks must be automatic.

Open Circuit Installation (Optional)

N/A Expansion tanks are not required for open circuit installations. Open circuits also typically use an external pump so, the internal pump may not be required.

Process Cooling Solutions

Standard Features

N/A
  • 3 bar pump
  • dynamic condensation control
  • phase monitor
  • crankcase heater
  • closed expansion tank
  • condenser air filter

Optional Features

N/A
  • 5 bar pump or higher
  • centrifugal fan
  • EC fan
  • remote control panel
  • RS 485 interface
  • PICO controller
  • duplex pump skid
  • non-ferrous
  • automatic overpressure bypass valve
  • open expansion tank
  • casters
  • aluminum panels
  • stainless steel panelss

More Capabilities

N/A
  • free cooling chillers
  • high capacity process chillers
  • cooling towers
  • dry fluid coolers
  • heat exchangersls

Note

Note for Inlet Water Temperature

N/A Assumes 45ºF cooling water supply, 55ºF cooling water return and 95ºF ambient temperature. For all other conditions refer to the correction factors

Note for Outlet Water Temperature

N/A Assumes 45ºF cooling water supply, 55ºF cooling water return and 95ºF ambient temperature. For all other conditions refer to the correction factors

Note for Ambient Temperature

N/A Assumes 45ºF cooling water supply, 55ºF cooling water return and 95ºF ambient temperature. For all other conditions refer to the correction factors

Note for Power Supply

N/A All models are 60 Hz. Protection class IP55 standard except for NCS 0002 - 0006 US IP44 standard.

Note for Cooling Capacity

N/A Assumes 45ºF cooling water supply, 55ºF cooling water return and 95ºF ambient temperature. For all other conditions refer to the correction factors

Note for Total Installed Power

N/A Total nominal absorbed power by (all) compressor(s) at rated inlet conditions using 230/1/60 or 460/3/60 power supply as applicable

Note for Evaporator Correction Factor

N/A Assumes no change to condenser inlet water temperature

Note for Condenser Correction Factor

N/A Assumes no change to evaporator outlet water temperature

Note for Correction Factors

N/A To be used as a guide only. All applications should be confirmed by nano.

Note

N/A Additional specifications available, consult factory

Correction Factors

Correction Factor at 30 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 0.68

Correction Factor at 35 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 0.79

Correction Factor at 40 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 0.91

Correction Factor at 45 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 1

Correction Factor at 50 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 1.10

Correction Factor at 55 Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 1.19

Correction Factor at 60+ Degree Fahrenheit (ºF) Water Outlet Temperature

N/A 1.27

Correction Factor at 75 Degree Fahrenheit (ºF) Ambient Temperature

N/A 1.18

Correction Factor at 80 Degree Fahrenheit (ºF) Ambient Temperature

N/A 1.14

Correction Factor at 85 Degree Fahrenheit (ºF) Ambient Temperature

N/A 1.11

Correction Factor at 90 Degree Fahrenheit (ºF) Ambient Temperature

N/A 1.04

Correction Factor at 95 Degree Fahrenheit (ºF) Ambient Temperature

N/A 1

Correction Factor at 100 Degree Fahrenheit (ºF) Ambient Temperature

N/A 0.96

Correction Factor at 7 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 0.993

Correction Factor at 105 Degree Fahrenheit (ºF) Ambient Temperature

N/A 0.92

Correction Factor at 9 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1

Correction Factor at 10 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1.003

Correction Factor at 12 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1.009

Correction Factor at 14 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1.015

Correction Factor at 16 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1.021

Correction Factor at 18 Degree Fahrenheit (ºF) Evaporator ΔT

N/A 1.025

Correction Factor at 10 Degree Fahrenheit (ºF) Condenser ΔT

N/A 1

Correction Factor at 12.5 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.99

Correction Factor at 15 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.98

Correction Factor at 17.5 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.97

Correction Factor at 20 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.96

Correction Factor at 22.5 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.95

Correction Factor at 25 Degree Fahrenheit (ºF) Condenser ΔT

N/A 0.93

Correction Factor at 0 Percent (%) Propylene Glycol

N/A 1

Correction Factor at 10 Percent (%) Propylene Glycol

N/A 0.99

Correction Factor at 20 Percent (%) Propylene Glycol

N/A 0.98

Correction Factor at 30 Percent (%) Propylene Glycol

N/A 0.97

Correction Factor at 40 Percent (%) Propylene Glycol

N/A 0.96

Correction Factor at 45 Percent (%) Propylene Glycol

N/A 0.95

Correction Factor at 50 Percent (%) Propylene Glycol

N/A 0.93