Print Back
Model CBEPLB PL-Series Air Compressor
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Shipping Weight

N/A 500 lb

Engine Type

N/A Gas

Power

N/A 14 hp

Tank Capacity

N/A 60 gal

Pump Model #

N/A PL15A

Speed at 175 psi Rating

N/A 1025 rpm

Displacement at 175 psi Rating

N/A 29.9 cfm

Delivery at 175 psi Rating

N/A 23.2 cfm

Speed at 250 psi Rating

N/A 950 rpm

Displacement at 250 psi Rating

N/A 27.7 cfm

Delivery at 250 psi Rating

N/A 19.8 cfm

Additional Information

N/A Service trucks, contractors, and farmers all need a reliable compressor that will be suitable for the tools they will use.

Champion is committed to delivering superior products built with the exceptional standards you expect from Champion.

Splash-Lubricated R-Series

Loaded with rugged features, the R-Series splash-lubricated compressors deliver high performance, long life and tremendous value.

Multi-finned cylinders
Cooler operating temperatures result in longer life and consistent performance over time.

Integral cylinder/head
Gasketless design eliminates the possibility of blown head gaskets for trouble-free operation.

Balanced pistons
Aluminum alloy first-stage piston is weight-matched to the cast iron second-stage piston, ensuring proper balance.

Piston rings
Two compression rings and one oil control ring provide excellent oil control, and high efficiency air delivery.

Lightweight connecting rods
High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral, precision-bored crankpin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.

Pressure relief valves
Located in interstage and discharge.

Intercoolers
Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency.

Optimized cooling fan/flywheel
Precision balanced flywheel has fan blades for optimum compressor cooling and life.

Reliable, high-flow valves
Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.

Oversized main bearings
Tapered roller-type main bearings provide full contact and support of the crankshaft plus delivers the longest possible life.

Balanced crankshaft
Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.

Large capacity crankcase
Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

Loadless starting
Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

Applications

N/A

  • Service Fleets
  • Automotive
  • Construction
  • Agricultural

Design Features

N/A

  1. Engine

  2. Comprehensive engine offering width sizes from 8 - 25 hp.

  3. Flexible Oil Drain Hose

  4. Clean services without messy oil spills.

  5. Belt Tensioning System with Engine Slide Base

  6. Provides easy service adjustments to the drive belt. The base plate also provides a sturdy platform to assist in vibration reduction.

  7. High Mounted Pressure Gauge

  8. Easy to read and reduces the risk of damage.

  9. Simple Mounting Feet

  10. One piece design for easy mounting.

  11. Precise Throttle Control

  12. Designed to provide accurate load control and easy starting.

  13. Industrial Duty Cogged V-Belts

  14. Provides maximum reliability and service life with minimal adjustments.

  15. Top Plate Design

  16. Extra clearance allows an abundant amount of room for hands and tools when servicing.

  17. Pilot Unloader Valve

  18. No more draining the tank from job site to job site. With a simple flip of the valve, the package can be started with a fully pressurized tank.

  19. Legendary Compressor Pumps
    Utilizes the R & PL Series compressors for the most dependable package in the industry.

Standard Features

N/A

  • Two Stage, Single Acting Compressor Pump
  • Available in Splash or Pressure Lubrication
  • ASME & CRN Certified 30, 60, 80 Gallon Horizontal Air Receivers
    • Manual Receiver Drain Valve
    • Pressure Relief Valve
    • Service Valve
    • Pressure Gauge
    • 30 Gallon Receivers Include Vibration Isolators
  • Belt Driven
  • Electric Start
  • Totally Enclosed Belt Guard
  • Oil Level Sight Glass
  • Reliable, High Flow Disc Valves
  • Intercooler for Cooling Between Stages
  • Precision Balanced Flywheel for Optimum Compressor Cooling
  • Gasketless Designed Integral Cylinder/Head
  • 5 Year Compressor Pump Warranty
  • Pumps Factory Filled with ChampLub Lubricants and are Tested at the Factory Prior to Shipment
  • Available with Preset Pressure Ratings up to 250 PSIG with the PL Series Pump

Options

N/A

  • Heavy Duty Vibration Isolators for 30 Gallon Receiver
  • Electric Fuel Pump
  • Regulator and Line Oiler
  • Canvas Cover

Note

N/A H - Honda, B - Briggs and Stratton, K - Kohler.

Only pressure lubricated units are capable of 250 PSIG operation.
Units tested in accordance with CAGI/PNEUROP Acceptance Test Code PN2CPTC3.
Dimensions are for R-Series compressors. Add 1" to the width for PL units.