Hurricane Series Compressors are used for Air or Nitrogen compression. Each compressor is an air-cooled, single acting, four stage, reciprocating piston compressor with the combination of oil pressure fed crankshaft bearings, and cylinder oil splash with regulated injection for the final high-pressure piston plunger design. Performance with inert gases, such as Nitrogen.
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Stages/Cylinders

N/A 4

Models

N/A WP4331 WP4341 WP4351

Operating Pressure Range

N/A 1750 to 5800 psi

Required Power

N/A 20 to 75 hp

Flow Rate

N/A 18 to 70 scfm

Features

Multi-Stage Oil-Lubricated Piston Compressor

N/A Standard

Inter-Stage and Final After-Cooler with Oil/Water Separators

N/A Standard

Over-Pressure Safety Valves at Each Stage

N/A Standard

Gas-Tight Over-Pressure Safety Valves at Each Stage (Piped Exit and Manifold)

N/A Optional

Automatic Oil/Water Drain Valves

N/A Standard

Auto-Starting Relief Integrated with Drain System

N/A Standard

Pressure Indicator at Each Stage

N/A Optional

Gas Over-Temperature Protective Shutdown Sensor

N/A Standard

Oil Lubrication Including Protection Sensor

N/A Optional

Pressure and Temperature Indicators and Sensor-Switch at All Stages

N/A Standard

Air-Blast Cooling Fan and Flywheel

N/A Standard

Lubricating Oil Level Alarm

N/A Standard

Gas Suction Connection (Flange and Pipe)

N/A Standard

Crankcase Oil Sump Heating

N/A Optional

Flexible Drive Coupling

N/A Standard

Direct Drive Electric Motor

N/A Standard

Direct-Drive Ex-Motor (Atex)

N/A Optional

Resilient AV Mounts

N/A Standard

Outlet Flexible Hose with Non-Return Valve

N/A Standard

Flexible Oil/Water Drain Hose

N/A Standard

Auto Start-Stop Pressure Sensor Control

N/A Standard

Oil/Water Drain Gas Separator 'Demister' Vessel

N/A Optional

Oil/Water Collection Tank

N/A Optional

Oil/Water Collection Tank (Level Alarm)

N/A Optional

Electrical Control Panel (Safe Area, Start/Stop, Alarms, and Shutdowns)

N/A Optional

Acoustic Enclosure (Internal Heater, Fan Ventilation, and Gas Detection)

N/A Optional

Ex-Proof Drive Coupling (Atex 95)

N/A Optional

Anti-Static Air-Blast Cooling Fan (Atex 95)

N/A Optional

Electrical Control Panel to Atex Zone 1 and 2

N/A Optional

Supply Gas Pressure Sensor Control (Auto-Stop/Restart)

N/A Optional

Supply Gas Isolating Valve (Manual, Solenoid, Actuator, and Electrical Inter-Lock)

N/A Optional

In-Line Gas Suction Filter

N/A Optional

Suction Gas Regulation (Pressure Reducing Valve)

N/A Optional

Suction Gas Shut-Off Valve (Solenoid and Actuated)

N/A Optional

Capacity Control (Re-Cycling By-Pass Valve and Discharge Back to Suction)

N/A Optional

Inlet Gas Pulsation Damper (Suction 'Buffer Tank' Inc. Drain/Purge Valve)

N/A Optional

Suction Gas Protection (Safety Valve, Pressure Gauge, and High/Low Pressure Sensor-Switch)

N/A Optional

Flexible Suction Gas Hose

N/A Optional

Outlet Oil Coalescing Filtration (Manual and Auto Drain)

N/A Optional

Outlet Oil Vapor Activated Carbon Filtration (Manual Drain)

N/A Optional

Outlet Purge Connection

N/A Optional

Final Pressure Maintaining Valve

N/A Optional

Gas Drying (Suction and Outlet Hp Dryer)

N/A Optional

Auto Stop/Start Pressure Sensor Control

N/A Optional