The VMAC G30 is the Most Affordable Gas Drive Rotary Screw Compressor On The Market.

Rotary screw compressors already proved their undisputed technical and performance superiority in almost all aspects over traditional reciprocating piston compressors. However, the cost of rotary screw compressors has remained the main challenge for most businesses to benefit from this technology. However, the VMAC G30 is a high performance, gas engine driven, rotary screw compressor that has a price point comparable to reciprocating gas drive competitors, but with reliability, durability and performance that is synonymous with VMAC® rotary screw compressors.
Unit of Measure

Air Compressor

Duty Cycle

N/A 100 %

Rated Air Capacity at 100 psi (Maximum 150 psi)

N/A 30 cfm

Compressor Type

N/A Belt-Driven

Air Compressor Warranty

N/A VMAC Lifetime Warranty (Limited)


Engine Start

N/A Electric

Engine Power

N/A 11.7 hp

Engine Type

N/A Gasoline OHV Engine

Emission Compliance


Engine Warranty

N/A 3 year Honda warranty



N/A 23.9 in


N/A 21.4 in


N/A 33.5 in


System Weight (Wet)

N/A 205 lb93 kg

Mounting Plate Width

N/A 19.125 in

Mounting Plate Length

N/A 25 in

Noise Level at 20 ft

N/A 81 dB

Fuel Tank Capacity

N/A 1.6 gal

Safety Features

Safety Features

  • Lightweight
  • Compressor Thermal Protection Circuit
  • Automatic Rapid Blow-Down Valve on Tank
  • 200 psi Pressure Relief Valve
  • Low engine oil pressure shutoff

System Components

Air Compressor

N/A VMAC® Oil-Injected Rotary Screw


N/A Patent pending integrated oil/air separator and air/oil cooler

Throttle Control

N/A Controlled by system air pressure, idles down/up automatically with air demand


N/A Honda GX390 Air Cooled 4-stroke OHV with Electric Start

Drive System

N/A Aluminum Belt-Guard Auto-Tensioned Serpentine Belt Clutchless Gearless

Optional Equipment

Low Profile Air Receiver Tanks (A500188)

N/A Triple 4-gallon air receiver tanks with mounting frame
Includes 200 psi pressure gauge, fittings, hose, ball valve and Drain valves.
  • Maximum pressure: up to 150 psi
  • Dimensions: 35" (l) x 20.5" (w) x 8.4" (h)
  • Weight: 80 lbs (36 kg

Remote Control Panel (A500042)

N/A Remote panel with 10 foot extension for key switch, hour meter, and choke

Continuous Duty Air Power

Continuous Duty Air Power

N/A The G30 provides you with continuous air flow of 30 CFM to get most day-to-day jobs done - only faster. The compressor is rated 100% duty-cycle which means it never stops producing the air that is required. Now you can seamlessly run your air tools without any interruptions and any need to wait for your compressor to fill a receiver tank. Focus on your work and leave all else to the G30 gas drive air compressor.

Un-Matched Size and Weight

Un-Matched Size and Weight

N/A The compressor is built from high quality light-weight aluminum components that makes it the lightest gas drive compressor available. The G30 is half the weight of competitive reciprocating models on the market. Also, its efficient design results in a small footprint that provides more room for your tools and other necessary equipment, and allows the compressor to easily fit on the side pack of a service body.

Backed by a Life Time Warranty

Backed by a Life Time Warranty

N/A VMAC® strives to provide the best warranty service in the industry to give you the peace of mind you need. Specifically, the G30 is supported by VMAC's Lifetime Warranty (Limited) on the air end and Honda's 3-Year warranty on the engine.

Did You Know?

Did You Know?

N/A By reducing the weight on your service truck by 200 lbs, you may be able to avoid the watchful eye of DOT regulations and save as much as 4% on your fuel costs.

Rotary Screw Quick Facts

Rotary Screw Quick Facts

  • Powerful 100% duty cycle means you can fill a tractor trailer tire in 180 seconds.
  • Rotary screw compressors have a long history of superior performance and durability.
  • A drier, cooler option over reciprocating compressors, the rotary screw compressor makes less unwanted heat and moisture in the system.
  • Smooth air delivery eliminates the need for large receiver tanks in most applications.

About VMAC®

About VMAC®

N/A Established in 1986, VMAC® began by designing jet engines for the Military and has now grown into a global leader in the manufacturing of mobile rotary screw air compressors with a network of 400 dealers.