Boosters and Gas Compressors On Compressed Air Systems, Inc.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Industrial Air Compressors > High Pressure Air Compressors > Sauer Air Compressors > Boosters and Gas Compressors > Passat Series Boosters


	Boosters and Gas Compressors

larger image

Passat ('G') Series Compressor/Boosters have been engineered with a gastight crankcase ('special' double crankshaft seals and jointing) to prevent gas leakage, and are oil-lubricated, single acting reciprocating compressors with air-cooling. The 'G' series compressor/boosters are similar in performance to the 'H' series but are designed for noble gases such as Helium and Argon, and hazardous gases such as Carbon Monoxide and Natural Gas. Oil pressure fed to the crankshaft bearings and oil splash for compression, combined with Sauer regulated oil injection system for the final piston plunger design, ensures high reliability. The ability to handle elevated suction pressure for both noble or hazardous gases, gives enhanced performance to final pressures between 290 - 580 PSI reliably in three stages and from 1450 - 5075 PSI in four stages within the gas flow rate range of 5.9 - 236 SCFM. Models Available in ATEX Version: WP156L, WP276L, WP316L

Financing · Specifications · Features

Financing

Approve Payments		Finance with Approve Payments

Specifications

Stages/Cylinders		3

Models		WP101L WP121L WP126L WP151 WP156L WP206L WP271L WP276L WP311L WP316L WP66L WP81L

Operating Pressure Range		150 to 1150 psi

Required Power		20 to 100 hp

Flow Rate		39 to 178 scfm

Features

Multi-Stage Oil-Lubricated Piston Compressor		Standard

Inter-Stage and Final After-Cooler with Oil/Water Separators		Standard

Over-Pressure Safety Valves at Each Stage		Standard

Gas-Tight Over-Pressure Safety Valves at Each Stage (Piped Exit and Manifold)		Standard

Automatic Oil/Water Drain Valves		Standard

Auto-Starting Relief Integrated with Drain System		Standard

Pressure Indicator at Each Stage		Standard

Gas Over-Temperature Protective Shutdown Sensor		Standard

Oil Lubrication Including Protection Sensor		Standard

Pressure and Temperature Indicators and Sensor-Switch at All Stages		Optional

Air-Blast Cooling Fan and Flywheel		Standard

Lubricating Oil Level Alarm		Optional

Gas Suction Connection (Flange and Pipe)		Standard

Crankcase Oil Sump Heating		Optional with Non-Explosion Proof Model only, Not available in Explosion Proof Model

Ex-Proof Crankcase Oil Sump Heating		Optional with Explosion Proof Model only, Not available in Non-Explosion Proof Model

Flexible Drive Coupling		Standard

Direct Drive Electric Motor		Standard with Non-Explosion Proof model only, Not available with Explosion Proof Model

Direct Drive Ex-Motor (ATEX)		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Resilient AV Mounts		Standard

Outlet Flexible Hose with Non-Return Valve		Standard

Flexible Oil/Water Drain Hose		Standard

Auto Start-Stop Pressure Sensor Control		Optional

Oil/Water Drain Gas Separator 'Demister' Vessel		Optional

Oil/Water Collection Tank		Optional

Oil/Water Collection Tank (Level Alarm)		Optional

Electrical Control Panel (Safe Area, Start/Stop, Alarms, and Shutdowns)		Optional

Acoustic Enclosure (Internal Heater, Fan Ventilation, and Gas Detection)		Optional

Ex-Proof Drive Coupling (ATEX 95)		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model Only

Anti-Static Air-Blast Cooling Fan (ATEX 95)		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model Only

Intrinsic Safe Relays for Pressure and Temperature Monitoring		Optional with Explosion Proof Model Only. Not available in Non-Explosion Proof Model

Intrinsic Safe Terminal Box for Electrical Connections		Optional with Explosion Proof Model Only. Not available in Non-Explosion Proof Model

Electrical Control Panel to ATEX Zone 1 and 2		Optional with Explosion Proof Model Only. Not available in Non-Explosion Proof Model

Supply Gas Pressure Sensor Control (Auto-Stop/Restart)		Optional

Supply Gas Isolating Valve (Manual, Solenoid, Actuator, and Electrical Inter-Lock)		Optional

Supply Gas Non-Return Valve		Optional with Explosion Proof Model Only. Not Available in Non-Explosion Proof Model.

Supply Gas Excess Flow Valve		Optional with Explosion Proof Model Only. Not available in Non-Explosion Proof Model.

In-Line Gas Suction Filter		Optional

Suction Gas Regulation (Pressure Reducing Valve)		Optional

Suction Gas Shut-Off Valve (Solenoid and Actuated)		Optional

Capacity Control (Re-Cycling By-Pass Valve and Discharge Back to Suction)		Optional

Inlet Gas Pulsation Damper (Suction 'Buffer Tank' Inc. Drain/Purge Valve)		Standard

Suction Gas Protection (Safety Valve, Pressure Gauge, and High/Low Pressure Sensor-Switch)		Standard

Flexible Suction Gas Hose		Optional

Outlet Oil Coalescing Filtration (Manual and Auto Drain)		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model Only.

Outlet Oil Vapor Activated Carbon Filtration (Manual Drain)		Optional

Outlet Purge Connection		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model Only.

Final Pressure Maintaining Valve		Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model Only.

Gas Drying (Suction and Outlet Hp Dryer)		Optional

Auto Stop/Start Pressure Sensor Control		Optional

Gas Recovery, or 'Blow-Down' Vessel (Purge, Drain, Safety Valve, and Pressure Gauge)		Standard

MORE IMAGES


	· Sauer WP4105 Booster

	· Sauer WP4325 N2 Booster

	· WP3325 Booster

DOWNLOADS


		Sauer USA Main Catalog

		Available Rental Units

		Finance with Approve Payments

		WP121L Data Sheet N2

		WP101L Data Sheet N2

		WP126L Data Sheet N2

		WP151L Data Sheet N2

		WP206L Data Sheet CNG

		WP206L Data Sheet N2

		WP271L Data Sheet N2

		WP311L Data Sheet N2

		WP66L Data Sheet N2

		WP81L Data Sheet N2

		WP156L Data Sheet CNG

		WP156L Data Sheet He

		WP276L Data Sheet CNG

		WP276L Data Sheet He

		WP316L Data Sheet CNG

		WP316L Data Sheet He

Boosters and Gas Compressors

Approve Payments

Stages/Cylinders

Models

Operating Pressure Range

Required Power

Flow Rate

Multi-Stage Oil-Lubricated Piston Compressor

Inter-Stage and Final After-Cooler with Oil/Water Separators

Over-Pressure Safety Valves at Each Stage

Gas-Tight Over-Pressure Safety Valves at Each Stage (Piped Exit and Manifold)

Automatic Oil/Water Drain Valves

Auto-Starting Relief Integrated with Drain System

Pressure Indicator at Each Stage

Gas Over-Temperature Protective Shutdown Sensor

Oil Lubrication Including Protection Sensor

Pressure and Temperature Indicators and Sensor-Switch at All Stages

Air-Blast Cooling Fan and Flywheel

Lubricating Oil Level Alarm

Gas Suction Connection (Flange and Pipe)

Crankcase Oil Sump Heating

Ex-Proof Crankcase Oil Sump Heating

Flexible Drive Coupling

Direct Drive Electric Motor

Direct Drive Ex-Motor (ATEX)

Resilient AV Mounts

Outlet Flexible Hose with Non-Return Valve

Flexible Oil/Water Drain Hose

Auto Start-Stop Pressure Sensor Control

Oil/Water Drain Gas Separator 'Demister' Vessel

Oil/Water Collection Tank

Oil/Water Collection Tank (Level Alarm)

Electrical Control Panel (Safe Area, Start/Stop, Alarms, and Shutdowns)

Acoustic Enclosure (Internal Heater, Fan Ventilation, and Gas Detection)

Ex-Proof Drive Coupling (ATEX 95)

Anti-Static Air-Blast Cooling Fan (ATEX 95)

Intrinsic Safe Relays for Pressure and Temperature Monitoring

Intrinsic Safe Terminal Box for Electrical Connections

Electrical Control Panel to ATEX Zone 1 and 2

Supply Gas Pressure Sensor Control (Auto-Stop/Restart)

Supply Gas Isolating Valve (Manual, Solenoid, Actuator, and Electrical Inter-Lock)

Supply Gas Non-Return Valve

Supply Gas Excess Flow Valve

In-Line Gas Suction Filter

Suction Gas Regulation (Pressure Reducing Valve)

Suction Gas Shut-Off Valve (Solenoid and Actuated)

Capacity Control (Re-Cycling By-Pass Valve and Discharge Back to Suction)

Inlet Gas Pulsation Damper (Suction 'Buffer Tank' Inc. Drain/Purge Valve)

Suction Gas Protection (Safety Valve, Pressure Gauge, and High/Low Pressure Sensor-Switch)

Flexible Suction Gas Hose

Outlet Oil Coalescing Filtration (Manual and Auto Drain)

Outlet Oil Vapor Activated Carbon Filtration (Manual Drain)

Outlet Purge Connection

Final Pressure Maintaining Valve

Gas Drying (Suction and Outlet Hp Dryer)

Auto Stop/Start Pressure Sensor Control

Gas Recovery, or 'Blow-Down' Vessel (Purge, Drain, Safety Valve, and Pressure Gauge)

Maintain Your Air Compressor