Request Information Finance with Approve Payments
Passat ('G') Series Compressor/Boosters have been engineered with a gastight crankcase ('special' double crankshaft seals and jointing) to prevent gas leakage, and are oil-lubricated, single acting reciprocating compressors with air-cooling. The 'G' series compressor/boosters are similar in performance to the 'H' series but are designed for noble gases such as Helium and Argon, and hazardous gases such as Carbon Monoxide and Natural Gas. Oil pressure fed to the crankshaft bearings and oil splash for compression, combined with Sauer regulated oil injection system for the final piston plunger design, ensures high reliability. The ability to handle elevated suction pressure for both noble or hazardous gases, gives enhanced performance to final pressures between 290 - 580 PSI reliably in three stages and from 1450 - 5075 PSI in four stages within the gas flow rate range of 5.9 - 236 SCFM. Models Available in ATEX Version: WP156L, WP276L, WP316L
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Stages/Cylinders

 N/A 3

Models

 N/A WP101L WP121L WP126L WP151 WP156L WP206L WP271L WP276L WP311L, WP316L WP66L WP81L

Operating Pressure Range

 N/A 150 to 1150 psi

Required Power

 N/A 20 to 100 hp

Flow Rate

 N/A 39 to 178 scfm

Features

Multi-Stage Oil-Lubricated Piston Compressor

 N/A Standard

Inter-Stage and Final After-Cooler with Oil/Water Separators

 N/A Standard

Over-Pressure Safety Valves at Each Stage

 N/A Standard

Gas-Tight Over-Pressure Safety Valves at Each Stage (Piped Exit and Manifold)

 N/A Standard

Automatic Oil/Water Drain Valves

 N/A Standard

Auto-Starting Relief Integrated with Drain System

 N/A Standard

Pressure Indicator at Each Stage

 N/A Standard

Gas Over-Temperature Protective Shutdown Sensor

 N/A Standard

Oil Lubrication Including Protection Sensor

 N/A Standard

Pressure and Temperature Indicators and Sensor-Switch at All Stages

 N/A Optional

Air-Blast Cooling Fan and Flywheel

 N/A Standard

Lubricating Oil Level Alarm

 N/A Optional

Gas Suction Connection (Flange and Pipe)

 N/A Standard

Crankcase Oil Sump Heating

 N/A Optional with Non-Explosion Proof Model only, Not available in Explosion Proof Model

Ex-Proof Crankcase Oil Sump Heating

 N/A Optional with Explosion Proof Model only, Not available in Non-Explosion Proof Model

Flexible Drive Coupling

 N/A Standard

Direct Drive Electric Motor

 N/A Standard with Non-Explosion Proof model only, Not available with Explosion Proof Model

Direct-Drive Ex-Motor (Atex)

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Resilient AV Mounts

 N/A Standard

Outlet Flexible Hose with Non-Return Valve

 N/A Standard

Flexible Oil/Water Drain Hose

 N/A Standard

Auto Start-Stop Pressure Sensor Control

 N/A Optional

Oil/Water Drain Gas Separator 'Demister' Vessel

 N/A Optional

Oil/Water Collection Tank

 N/A Optional

Oil/Water Collection Tank (Level Alarm)

 N/A Optional

Electrical Control Panel (Safe Area, Start/Stop, Alarms, and Shutdowns)

 N/A Optional

Acoustic Enclosure (Internal Heater, Fan Ventilation, and Gas Detection)

 N/A Optional

Ex-Proof Drive Coupling (Atex 95)

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Anti-Static Air-Blast Cooling Fan (Atex 95)

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Intrinsic Safe Relays for Pressure and Temperature Monitoring

 N/A Optional with Explosion Proof Model only. Not available in Non-Explosion Proof Model

Intrinsic Safe Terminal Box for Electrical Connections

 N/A Optional with Explosion Proof Model only. Not available in Non-Explosion Proof Model

Electrical Control Panel to Atex Zone 1 and 2

 N/A Optional with Explosion Proof Model only. Not available in Non-Explosion Proof Model

Supply Gas Pressure Sensor Control (Auto-Stop/Restart)

 N/A Optional

Supply Gas Isolating Valve (Manual, Solenoid, Actuator, and Electrical Inter-Lock)

 N/A Optional

Supply Gas Non-Return Valve

 N/A Optional with Explosion Proof Model only. Not available in Non-Explosion Proof Model

Supply Gas Excess Flow Valve

 N/A Optional with Explosion Proof Model only. Not available in Non-Explosion Proof Model

In-Line Gas Suction Filter

 N/A Optional

Suction Gas Regulation (Pressure Reducing Valve)

 N/A Optional

Suction Gas Shut-Off Valve (Solenoid and Actuated)

 N/A Optional

Capacity Control (Re-Cycling By-Pass Valve and Discharge Back to Suction)

 N/A Optional

Inlet Gas Pulsation Damper (Suction 'Buffer Tank' Inc. Drain/Purge Valve)

 N/A Standard

Suction Gas Protection (Safety Valve, Pressure Gauge, and High/Low Pressure Sensor-Switch)

 N/A Standard

Flexible Suction Gas Hose

 N/A Optional

Outlet Oil Coalescing Filtration (Manual and Auto Drain)

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Outlet Oil Vapor Activated Carbon Filtration (Manual Drain)

 N/A Optional

Outlet Purge Connection

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Final Pressure Maintaining Valve

 N/A Standard with Explosion Proof Model, Optional with Non-Explosion Proof Model only

Gas Drying (Suction and Outlet Hp Dryer)

 N/A Optional

Auto Stop/Start Pressure Sensor Control

 N/A Optional

Gas Recovery, or 'Blow-Down' Vessel (Purge, Drain, Safety Valve, and Pressure Gauge)

 N/A Standard