Request Information
The Secotec™ cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to operate even during low demand periods.

TF Models available water-cooled.
Unit of Measure

Financing

Approve Payments

 N/A

Finance with Approve Payments

Specifications

Pressure

 N/A 2.8 psig

Other Options

 N/A By-Pass Piping

Flow at 100 Pound Per Square Inch (psi) Pressure

 N/A 1130 ft³/min

Electric Voltage

 N/A 460 V

Phase

 N/A 3

Electrical Frequency

 N/A 60 Hz

Connection Size

 N/A 3 in

Drain Connection Size

 N/A 2 x 1/4 in

Weight

 N/A 925 lb

Dimension (H x W x D)

 N/A 79 x 33 x 49 in

Minimum Ambient Temperature

 N/A 38 ºF

Maximum Ambient Temperature

 N/A 110 ºF

Maximum Inlet Temperature

 N/A 140 ºF

Standard Features

Standard Features

 N/A
  • Powder coated removable side panels
  • Air-to-air heat exchanger (except TA 5)
  • Condensate separator
  • Electric demand drain (except TA 5)
  • R134a refrigerant
  • Power cord with plug (TA 5 - TC 44)

Control Panel

Control Panel

 N/A
  • Dew point indicator
  • On/off switch
  • Power on LED light
  • Refrigerant compressor on LED light
  • Two dry contacts (on TC 31 and up) for:
    • Power on
    • High dew point temperature