MST's Automatic Shut-Off Diverter Device, (ASODD), is designed to supply compressed air from a main source and divert to a secondary air source when an outside signal has energized the ASODD's solenoid valve. The main air source enters at 1/2" FPT and exists at 1/2" FPT. The ASODD's power requirement is 120 VAC and can be supplied through a supplied power cord. When an outside signal source energizes the ASODD's switching relay through the signal cord/plug, the ASODD's solenoid valve shuts off the main air source and allows the secondary air sourced to flow to the outlet. When the signal source de-energizes, the air flow will be diverted back to the main air source The signal source can be any 1.0 amp maximum at 12 VDC.
Unit of Measure
Specifications
Weight |
N/A 5.6 kg12 lb |
Dimensions (L x W x D) |
N/A 406 x 330 x 178 mm16 x 13 x 7 in |
Temperature Range |
N/A -20 to 130 ºF-29 to 54 ºC |
Main Air Supply Max. Inlet Pressure |
N/A 150 psig10.3 bar |
Secondary Air Supply Pressure Range |
N/A Equal or greater than main air supply and not greater than 150 psig (103 bar) |
Response Time at 90 Pound per Square Inch Gauge (psig) Pressure |
N/A 9 ms |
Main Power Supply (Alternating Current (AC)) |
N/A 120 V |
Maximum Switching Signal at 12 Volt (V) Direct Current (DC) Voltage |
N/A 1.0 A |
