Pharmaceutical grade process filters for critical processes requiring integrity validation.

The nano P1-Series range of sterile membrane process filters are fabricated from polished 304 or 316 stainless steel for critical compressed air and gas applications in the pharmaceutical, high tech manufacturing, food processing, and beverage industries.

This range encompasses ten models with connections from 1/4" to 3" and rated flows from 40 to 702 scfm.

Specifically designed for absolute particulate and bacteria retention in sterile environments, these filters are ideally suited for pharmaceutical protocols where documentation and integrity are critical.
Unit of Measure

Specifications

Filter Type

N/A Membrane

Technical Specification

Maximum Rated Flow

N/A 118 scfm201 Nm³/h

Inlet and Outlet Connection Size

N/A 1-1/2 in NPTF

Dimension A

N/A 12.697 in

Dimension B

N/A 5.512 in

Dimension C

N/A 3.346 in

Dimension D

N/A 3.484 in

Approximate Weight

N/A 11.4 lb5.2 kg

Replacement Element Kit

N/A E 105 SM

Performance Specifications

Particle Removal @ 100% Pleated Depth PP

N/A 0.2 Micron

Maximum Continuous Operating Temperature

N/A 140 ºF

Maximum Steam Sterilization Temperature (@ 30 Psia for 20 Minutes)

N/A 257 ºF

Maximum Design Operating Pressure

N/A 232 psig

Materials of Construction

Standard Body Housing Materials

N/A 1.4301 Quality 304 Stainless

Optional Body Housing Materials

N/A 1.4404 Quality 316L Stainless

Standard Polishing Housing Materials

N/A Passivated and Polished to Grade Ra <1.6 µm

Optional Polishing Housing Materials

N/A Passivated and Polished to Grade Ra <1.6 µm

Standard Seals Housing Materials

N/A Aseptic EPDM

Optional Seals Housing Materials

N/A Consult Factory

Standard Inlet and Outlet Connections Materials

N/A NPT (Female)

Optional Inlet and Outlet Connections Materials

N/A Tri-Clamp Sanitary

Standard Drain and Vent Connections Materials

N/A 1/4 in BSPP

Optional Drain and Vent Connections Materials

N/A 1/4 in BSPP

Standard Element to Housing Connections Materials

N/A Dual O-Ring Positive Click Lock Seal

Optional Element to Housing Connections Materials

N/A Dual O-Ring Positive Click Lock Seal

Standard Media Element Materials

N/A Hydrophobic PTFE Membrane

Optional Media Element Materials

N/A Hydrophobic PTFE Membrane

Standard Media Support Element Materials

N/A Polypropylene

Optional Media Support Element Materials

N/A Polypropylene

Standard Endcaps Element Materials

N/A Polypropylene

Optional Endcaps Element Materials

N/A Polypropylene

Standard Seals Element Materials

N/A Dual Silicone O-Rings

Optional Seals Element Materials

N/A Dual Silicone O-Rings

Note

N/A All materials conform to 21CFR Part 177 of the US code of Federal Regulations and USP Class VI Biological test for plastics.

Applications

N/A Food Processing Beverage Dairy Biotechnology Hospitals Pharmaceuticals

Additional Information

N/A The PTFE membrane filtration media is housed in a polypropylene element which incorporates a positive double o-ring click-lock seal and is 100% integrity tested for reliable performance.

Absolute bacteria and particulate retention for critical integrity.

With high efficiency and low pressure drop these filters provide efficient, cost effective performance for absolute validated filtration in compressed air or gas prior to incidental product contact. There is no better filter for your critical process filtration needs.