The NUFORS-CR removes all types of condensate from compressed air systems up to 100 m³/min. without the requirement of electricity.

The discharge process is automatic and is based on a newly developed 3/2 way level controlled valve principle that operates a piston type direct acting valve.

The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable.

The integrated stainless steel strainer protects the valve, optimizing the discharge performance.
Unit of Measure

Specifications

Brands

N/A Jorc

Media

N/A Condensate

Industry Standards/Certifications

N/A CE NEN - EN - ISO 9001:2015 Certified

Technical Specification

Maximum Compressor Capacity

N/A 100 m³/min
Maximum Drainage Capacity1 N/A 1062 L

Minimum/Maximum System Pressure

N/A 3 to 16 bar

Minimum/Maximum Medium Temperature

N/A 1 to 50 ºC

Minimum/Maximum Ambient Temperature

N/A 1 to 50 ºC

Inlet Connection Size

N/A 1/2 in

Inlet Connection Type

N/A British Standard Pipe (BSP) National Pipe Thread (NPT)

Number of Inlet Options

N/A 3

Top Inlet Height

N/A 11.2 cm

Side Inlet Height

N/A 1.5 cm9.7 cm

Outlet Connection Size

N/A 1/4 in

Outlet Connection Type

N/A British Standard Pipe (BSP)

Valve Type

N/A Direct Acting

Valve Orifice

N/A 6 mm

Valve Seal

N/A FPM

Serviceable Valve

N/A Yes

Integrated Mesh Strainer

N/A Yes

Housing Material

N/A Corrosion Resistant Aluminum Electrophoretic (EP) Coating

Test Feature

N/A Yes

Environmental Protection Inlet

N/A Ingress Protection (IP68) (National Electrical Manufacturers Association (NEMA 6))

Commercial Benefits

Commercial Benefits

N/A
  • Suitable for any type of compressed air system
  • No electricity required - install and go
  • No operating costs
  • Competitive 'true green' solution
  • Reduced stocking costs - 1 model covers 100 m³/min.
  • No complicated sizing charts required
  • Consult Jorc for private labelling options

Technical Advantages

Technical Advantages

N/A
  • Compact and unique design
  • Incredibly easy and quick to install and service
  • No complicated external control air balance line required
  • Integrated mesh strainer
  • Top- and side inlets available
  • Test button feature for routine testing
  • Robust corrosion resistant aluminum housing
  • Direct acting valve construction for a reliable condensate discharge operation
  • Successful draining of, even heavily emulsified, condensate due to large 6 mm valve orifice

Note

Note

N/A Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, Jorc reserves the right to revise information without notice and without incurring any obligation.
  • 1 Condensate Per Hour at 16 bar.