The MINI-MAG is a magnetically operated zero air loss drain that discharges condensate from all types of compressed air filters by using a unique technology based on magnetic forces.
The MINI-MAG uses specially selected magnets that operate the 2/2 way direct acting valve assembly.
The discharge process of the MINI-MAG is automatic and there is no loss of compressed air during the condensate discharge cycle.
The specially selected magnets ensure a high operation consistency.
The MINI-MAG is easy to install and to service and can also remain hooked up to the filter while maintenance is being carried out (i.e. the drain does not need to be unthreaded from the filter).
Jorc recommends to replace all unreliable filter (float) drains and to install the MINI-MAG.
The MINI-MAG uses specially selected magnets that operate the 2/2 way direct acting valve assembly.
The discharge process of the MINI-MAG is automatic and there is no loss of compressed air during the condensate discharge cycle.
The specially selected magnets ensure a high operation consistency.
The MINI-MAG is easy to install and to service and can also remain hooked up to the filter while maintenance is being carried out (i.e. the drain does not need to be unthreaded from the filter).
Jorc recommends to replace all unreliable filter (float) drains and to install the MINI-MAG.
Unit of Measure
Financing
|
Specifications
|
Technical Specification
|
Commercial Benefits
|
Technical Advantages
|
Note
Specifications
Brands |
N/A Jorc |
Drain Type |
N/A Zero Loss |
Industry Standards/Certifications |
N/A CE NEN - EN - ISO 9001:2015 Certified |
Technical Specification
Maximum Filter Capacity |
N/A Unlimited |
| Maximum Drainage Capacity1 | N/A 145 L |
Minimum/Maximum System Pressure |
N/A 0 to 16 barUp to 230 psi |
Minimum/Maximum Medium Temperature |
N/A 1 to 50 ºC |
Minimum/Maximum Ambient Temperature |
N/A 1 to 50 ºC |
Environmental Protection Inlet |
N/A Ingress Protection (IP68) (National Electrical Manufacturers Association (NEMA 6)) |
Inlet Connection Size |
N/A 0 1/2 in |
Inlet Connection Type |
N/A British Standard Pipe (BSP) National Pipe Thread (NPT) |
Inlet Height |
N/A 10.3 cm |
Outlet Connection Size |
N/A 1/8 in |
Outlet Connection Type |
N/A British Standard Pipe (BSP) |
Valve Type |
N/A 2/2 Way Direct Acting |
Valve Orifice |
N/A 2 mm |
Valve Seal |
N/A FPM |
Serviceable Valve |
N/A true |
Housing Material |
N/A Corrosion Resistant Aluminum Electrophoretic (EP) Coating |
Anti-Air-Lock Adapter |
N/A Standard Integrated |
Commercial Benefits
Commercial Benefits |
N/A
|
Technical Advantages
Technical Advantages |
N/A
Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, Jorc reserves the right to revise information without notice and without incurring any obligation. The filter is an image offered by Walker Filtration Ltd. with the aim of presenting the MINI-MAG under a filter. Jorc does not sell filters. |
Note
Note |
N/A
Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, Jorc reserves the right to revise information without notice and without incurring any obligation. The filter is an image offered by Walker Filtration Ltd. with the aim of presenting the MINI-MAG under a filter. Jorc does not sell filters. |
- 1 Condensate Per Hour at 16 bar.
