The integrated, precise differential pressure sensor measures the differential pressure/dynamic pressure at the sensor tip. The pressure depends on the respective gas velocity. The flow is therefore easy to determine by means of the pipe diameter.
The additional measurement of temperature and absolute pressure and calculation of the relevant density means that measuring can be carried out for various gases, a wide variety of temperatures and pressures.
The additional measurement of temperature and absolute pressure and calculation of the relevant density means that measuring can be carried out for various gases, a wide variety of temperatures and pressures.
Unit of Measure
Specifications
Measuring Range (Compressed Air) |
N/A 2 to 224 m/s600 m/s |
Differential Pressure for Gases |
N/A 0.04 to 500 mbar |
Measured Medium |
N/A Air Gas |
Accuracy |
N/A ± 1.5% of Measured Value (M.V.) |
Measuring Principle |
N/A Differential Pressure |
Measuring Span |
N/A 1:100 300 |
Response Time |
N/A t 99 <1 sec |
Temperature of The Medium |
N/A -22 to 356 ºF |
Operating Pressure |
N/A -1 to +100 barg |
Ambient Temperature |
N/A -4 to +158 ºF |
Protection Class |
N/A Ingress Protection (IP 67) |
Direct Current (DC) Voltage |
N/A 18 to 36 V |
Power |
N/A 5 W |
Outputs |
N/A 1x 4 to 20 mA analogue output (electrically not isolated), pulse output, RS 485 (Modbus-RTU) |
Optional Output |
N/A 2 x 4 to 20 mA active, Ethernet interface (PoE), M-Bus |
Benefits
Benefits |
N/A
Benefits at a glance:
|
