Proven Design…

At Champion, air compressor systems are our only products. We know and understand the application of our product in many different environments. Our goal is to provide the best compressors and service that will exceed your expectations!

Champion’s full line of compact Commandair reciprocating air compressors are manufactured to the same quality standards as our larger, industrial models. These packages are sized for smaller air requirements such as small industrial plants, schools, small automotive centers, and do-it-yourselfers.
Unit of Measure



N/A Electric


N/A 1 1/2 hp

Tank Capacity

N/A 30 gal

Pump Model #



N/A 731 rpm

Displacement at 90 psig

N/A 7.50 cfm
Delivery at 90 psig1 N/A 5.3 cfm

Bore Diameter

N/A 2.38 in

Stroke Size

N/A 2.00 in

Number of Cylinders

N/A 2

Overall Length

N/A 42 in

Overall Width

N/A 21 in

Overall Height

N/A 28 1/2 in

Bolt Down Length

N/A 20 in

Bolt Down Width

N/A 12 13/16 in

Approximate Net Weight

N/A 205 lb

General Description

N/A Single-Stage Electric Driven

The single-stage series of Commandair air compressor packages are available from 1/2 through 3 HP, with the option of horizontal or vertical style receivers, or as base mounted. Air pressure ratings are available up to 125 PSIG. Thermal overload protected motors are standard on 1/2 through 1 HP, single phase, 115 Volt units.

  • Cast iron cylinders for holding rigid tolerances and ensuring high compressor efficiency.
  • Lightweight aluminum alloy pistons ensure proper reciprocating balance. Two compression rings and one oil-control ring are used for better oil control, less air blow-by, and higher efficiency.
  • High density, high silicon die-cast aluminum alloy connecting rods minimize reciprocating weight and help promoted exceptional compressor life.
  • High-quality Swedish Steel reed-type valves provide long life.
  • Tapered roller bearings on two and three cylinder models provide premium low friction movement for minimized efficiency.
  • Precision balanced flywheel has fan blades for maximum compressor cooling resulting in cooler compressor operating temperatures.
  • Rugged ductile iron crankshaft has large diameter throws for minimum bearing loads and counterweights to minimize vibration.
  • Rugged cast iron crankcase designed to rigidly support the crankshaft and bearings.
  • Convenient oil level sight gauge on 2 and 3 cylinder models.
  • Removable cartridge-type intake filter features a 10-micron rated element.

  • 1 Units tested in accordance with CAGI/PNEUROP acceptance test code PN2CPTC2 or PN2CPTC3