Utilizing the vehicles own engine for power, Vanair® underdeck rotary screw compressor systems provide you with the exceptional power your crew needs to get the job done where and when they need it -without hauling an expensive air compressor tow-behind. Using a single PTO opening, these systems provide up to 200 CFM (Pump Sold Separately) of impressive air power, AC power or hydraulics, or any combination of all three. At half the cost of a tow-behind, PTO underdeck systems mount seamlessly out of sight, under the vehicle, leaving the towing hitch free for other equipment and opens up the truck bed for additional storage space.
Unit of Measure

Specifications

Brands

N/A Vanair® Xcite™

Generator Power

N/A 6.8 kW

Generator Voltage

N/A 120/240 V120 V

Phase

N/A 1

Generator Current

N/A 84/42 A

Speed

N/A 1800 rpm

Weight

N/A 80 lb

Duty Cycle

N/A 100 %

Design Life

N/A 100,000 hours

Flash Point Temperature

N/A 257 ºC495 ºF

Pour Point Temperature

N/A -45 ºC-50 ºF

Pressure Rating

N/A Up to 250 psi

Industry Standards/Certifications

N/A American Society of Mechanical Engineers (ASME) Canadian Registration Number (CRN)

Air Compressor

N/A
  • Greater Efficiency for Lower Engine RPMs
  • Integrated Inlet Valve and Rear Discharge Provides Higher Ground Clearance

Dimensions

Length

N/A 17 in

Width

N/A 11.5 in

Height

N/A 12 in

Discharge System

Discharge System

N/A
  • In-tank Coalescer System Provides Greater Surface Area for Increased Oil Separation
  • Coalescer is Protected from the Elements, Eliminating the Possibility of Rust or Damage from External Source
  • Less Prescribed Maintenance and Waste Oil Recovery Costs
  • Less than 2 PPM Oil Carryover
  • 5 Year Warranty or 3000 Hours for Replacement on Coalescer Element Only
  • Smaller Tank Design Makes Installation Easier
  • Streamlined Fittings on the End of Tank

Air Filter

Air Filter

N/A
  • ABS Plastic Housing
  • Dual Stage

SAE B Pad

SAE B Pad

N/A
  • Limited to 77 Ft. Lbs.

Cooler(S)

Cooler(S)

N/A
  • Capable of Cooling Up to 200 CFM at Up to 175 PSI
  • Air to Oil Heat Exchanger Driven by 12V Fan

Instrumentation

Instrumentation

N/A Vanair® Total Electronic Control System (V-TEC™)
Diagnostic Monitoring Display Includes:
  • Remote Engine Speed Control
  • Built-In Safety Features
  • Complete Startup & Shutdown Capabilities
  • Oil Temperature & Air Pressure System Checks
  • Troubleshooting & Maintenance Display Assistance & Alerts
  • LCD

Vanguard Rotary Screw Compressor Oil

Vanguard Rotary Screw Compressor Oil

N/A
  • Full Synthetic Oil Exclusively Created for Rotary Screw Compressors
  • Outstanding Thermal and Oxidative Stability
  • Reduced Oil Disposal Due to Extended Drain Intervals

Safety Equipment

Safety Equipment

N/A
  • High-Temperature Shutdown
  • High-Pressure Shutdown
  • Air Pressure-Relief Safety Valve
  • Minimum Pressure Valve
  • Automatic Blowdown on Shutdown
  • Oil Fill Plug Safety Relief

Accessories and Options

Accessories and Options

N/A
  • External, Spin-on Air-Oil Separating Element
  • Dual Pressure
  • Dual Voltage
  • Service/Control Line Moisture Separators
  • Filter/Lubricator/Regulator (FLR)
  • Air Hoses, Hose Reels, and Fittings
  • OSHA Safety Valve (Velocity Fuse)
  • Tool Oiler/Lubricator
  • Biodegradable Vanguard Green™ Synthetic Oil

Hydraulic System Requirements

Hydraulic System Requirements

N/A All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).

Warranty

Warranty

N/A Lifetime Warranty on Air End

Note

Note

N/A Made in USA.

Consult factory for additional kW options.