| Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Vacuum Pumps, Blowers & Parts > Medical, Laboratory and Industrial Vacuum Pump Systems > Medical Claw Open Vacuum Systems > Item # CVTD0504BV  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # CVTD0504BV, 5 HP Duplex Tankmount Medical Claw Open Vaccum System CVTD0504BV
Web Price QUOTE


Medical Claw Open Systems

The claw pump design is extremely efficient and has very low maintenance cost; because there is no actual contact between the rotors and the cylinder wall, parts that need replacing or required maintenance is minimized.




Financing  · Dimensions  · Tankmount Vacuum Systems  · Specifications  · Vacuum System  · Rotary Vane Vacuum Pump  · Motor  · Receiver  · Control Panel  · Available Options  · Note  · Additional Information

Financing

Approve Payments
Finance with Approve Payments



Dimensions

Length (A)
77 in

Width (B)
43 in

Height (C)
72 in

Inlet Connection Size
2 in

Outlet Connection Size
1 in


Tankmount Vacuum Systems

Pump Power
5 hp

Air Flow at 19 inHg1
38 scfm

Tank Capacity
120 gal

Tank Orientation
Vertical

Compressor Capacity
10,838 Btu/hr

Sound Level
79 dBA

System Full Load Current (F.L.A) at 208 Volts
26.8 A

System Full Load Current (F.L.A) at 230 Volts
24.8 A

System Full Load Current (F.L.A) at 460 Volts
13.4 A

System Weight
1460 lb
1 Air Flow shown at total system capacity.


Specifications

Brands
Powerex®

Electrical Panel Opening
42 in

Minimum Clearance for Ease of Maintenance
24 in

Motor Voltage
208 V
230 V
460 V

Phase
3

Power Supply Frequency
60 Hz


Vacuum System
The Powerex medical vacuum system is designed to create a suction system to remove unwanted fluids or gases from hospital/ laboratory working areas. The medical vacuum system package is compliant with the NFPA 99 requirements for Risk Category 1 systems. Each system is completely tested before shipment and includes:

• Multiple vacuum pumps and associated equipment.
• AMSE air receiver.
• Medical control panel. Each pump is factory piped to a common intake manifold. Vibration isolation pads are included with the system.


Rotary Vane Vacuum Pump
Each pump shall be a rotary claw type vacuum pump, and shall be direct-driven through a shaft coupling by a C-face, TEFC electric motor.

• Each vacuum pump shall be dry-running, featuring two claw-type, non-contacting rotors and shall not require any sealing fluid in the pumping chamber, assuring virtually maintenance-free operation.
• Each vacuum pump shall include an internal relief valve, and a built-in, anti-suck-back valve mounted at the pump inlet.
• Each pump within the system shall include a check valve, inlet and discharge flex connectors, a 5 micron inlet filter and a pump isolation valve.


Motor
The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation.


Receiver
The system shall include an ASME rated air receiver. The tank shall be equipped with a vacuum gauge, a sight gauge, by-pass valves, and a manual drain.


Control Panel
The control system provides automatic lead/lag sequencing and automatic alternation of all pumps in order to equalize the amount of usage among the available vacuum pumps. The Premium NFPA Control panel shall include a gateway server card and all features listed below:
  • PLC controller and a color touch screen panel which displays the operating status of the unit.
  • Building automation communication gateway with BacNet® protocol and Web server features. Web servers features include email notifications in case the system is in alarm or has achieved one its maintenance intervals and requires service.
  • Ethernet port for connection to BacNet® server or direct connection to facility Ethernet for viewing of system operations and status via device IP-address.
  • UL508A listed control panel in a NEMA 12 enclosure. The panel door will include: the HMI touch screen, an audible and visual alarms with an acknowledge button, and an HOA switch for each pump.
  • Magnetic starters.
  • Vacuum transducer for process control.
  • Single point power connection.
  • Redundant 120Vac control transformers with fused primary and secondary protection.
  • System overload trip, high temperature conditions or maintenance intervals for the pump will result in visual and audible alarms.


Available Options
• Oxygen assured pumps - prepared for use in WAGD systems.
• Internal tank lining for corrosion resistance.
• Variable Frequency Drive (VFD) Control Panel – with Premium NFPA controls.


Note
3 Year Limited Warranty


Additional Information
Benefit & Features
  • Energy efficient technology
  • Oil-free compression chamber
  • Low maintenance
  • No water and sewage costs
  • Suitable for dedicated waste anesthesia systems
  • Expandable configurations for skid mounted systems up to quadplex
  • Fully compliant with NFPA 99
  • Manufactured in ISO 9001:2015 certified facilities


 MORE IMAGES 

·  WhisperVac-Claw-patented-logo-FINAL-RBG-1536x679.png


 DOWNLOADS 

Medical Vacuum - pages (SR4325).pdf
(PDF, 2183KB)

Finance with Approve Payments


Maintain Your Air Compressor

Learn more about maintaining your air compressor by downloading our eBook on air compressor maintenance.

 Download eBook