Our all-in-one WETBLAST FLEX™ system gives you convenience you don't get from traditional slurry systems. Its design and simplified set up and operation make for easier end-of-shift shutdown. By mixing the abrasive and water after it leaves the blast machine, you never have to empty a machine of a messy water/abrasive mix.
Unit of Measure

Specifications

Blast Machine Volume

N/A 6 ft³

Control Line

N/A 50 ft

Water Tank Capacity

N/A 120 gal

Hose Size

N/A 50 ft

Pressure Regulator Size

N/A 1-1/2 in

Air Filter Size

N/A 1-1/2 in

Base Weight

N/A 1450 lb

Package Weight

N/A 1550 lb

Number of Long Venturi Nozzle

N/A 8
FLEX™ Base Unit1 N/A 1 -1/4 in. Thread: Stock No. 28436 1 W Pressure Regulator & Air Filter 6 ft³ Blast Machine with Pneu Remotes and 50 ft Control Line Abrasive Cut-Off Switch Base-Mount WETBLAST Injector™ Blast Machine Screen & Cover Contractor Thread: Stock No. 28434 Standard WETBLAST Injector™ with 50' Hose WETBLAST Injector™ Pump Module

FLEX™ Package

N/A #8 Long-Venturi Nozzle Apollo 600 HP DLX 1-1/4 in. Thread: Stock No. 28437 Base Unit 50' Coupled Supa Hose Clem-Cool Air Conditioner 50' Respirator Hose Contractor Thread: Stock No. 28435 CPF-20 (installed on skid) Nominal Spares

Dimensions

Length

N/A 68 in

Width

N/A 46 in

Height

N/A 52 in

Additional Information

N/A Flexible set up options allow you to position the water injector either at the base of the blast machine or at the nozzle - your choice. With the injector at the nozzle, you can adjust the water/abrasive mix at any time.

You can dry-blast with the FLEX™, simply remove the injector adapter mounted at the base of the machine, and turn off air to the pump.

Skid Mounted

N/A All in one convenient design with fork lift pockets and lifting eyes.

Water Source

N/A Use the on board water tank or connect the system to a municipal water source

Abrasive Cut Off Switch

N/A With injector and ACS at the nozzle, you can control wash down and surface blow off without a trip to the blast machine.

No Pot Tender Needed

N/A With the injector adapter and ACS mounted at the nozzle, there's no need for a pot tender.

  • 1 Systems differ with choice of nozzle injector adapter - contractor or fine thread.