Request Information
The AOC Series is a complete after cooler and oil cooler package designed to work on most rotary air compressors. The package includes an after cooler/oil cooler, fan, motor, guards and mounting brackets. Ideal for converting water cooled compressors to air cooled or for remote mounting the cooling package from the compressor.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Electric Motor Data

Power

 N/A 1/2 hp

Speed

 N/A 3250 rpm

Motor Frame

 N/A IEC 71

Voltage (1Ø)

 N/A 115 V230 V

Frequency (1Ø)

 N/A 60 Hz

Full Load Current at 230 Volt (V) (1Ø)

 N/A 3.4 A

Frequency (3Ø)

 N/A 50 Hz60 Hz

Full Load Current at 230 Volt (V) (3Ø)

 N/A 1.2 A

Voltage (3Ø) - 50 Hz

 N/A 200 V220 V380 V440 V

Voltage (3Ø) - 60 Hz

 N/A 203-230 V460 V

Specifications

Air Compressor Horsepower

 N/A 10 to 15 hp

Ambient Air Temperature

 N/A +100 ºF = Compressor Oil Inlet Temperature. +15 ºF = Compressor Air Outlet Temperature.

Flows

 N/A Horsepower x 0.25 = 2-5 GPM (bearing oil cooling) = Oil Flow
Compressor Horsepower x 4.5 = SCFM Air Flow

Maximum Working Pressure

 N/A 250 psi

Cooler Material

 N/A Aluminum

Shroud Material

 N/A Powder Painted Steel

Fan Guard Material

 N/A Zinc Plated Steel

Fan Blade Material

 N/A Aluminum Hub Polypropylene Blades

Mounting Brackets Material

 N/A Powder Painted Steel

Dimension A

 N/A 16.25 in

Dimension B

 N/A 19.88 in

Dimension C

 N/A 16.69 in

Dimension D

 N/A 14.80 in

Dimension E

 N/A 13.62 in

Dimension F

 N/A 10.47 in

Dimension G

 N/A 3.50 in

Dimension H

 N/A 1.00 in. National Pipe Thread (NPT)

Dimension J

 N/A 1.00 in. National Pipe Thread (NPT)

Dimension K

 N/A 18.58 in

Dimension L

 N/A 7.36 in

Dimension M

 N/A 3.07 in

Dimension N

 N/A 3.50 in

Dimension P

 N/A M8 x 10 BOLT (4PL)

Shipping Weight

 N/A 60 Pound

Net Weight

 N/A 50 lb

Alternate #

N/A X-AOC15

Technical Specifications

Maximum Working Temperature

 N/A 250 ºF

Features

Features

 N/A
  • Complete Package includes aftercooler/oil cooler, fan, motor, guards and mounting brackets.
  • Convert Water cooled compressors to air cooled. Eliminate corrosion and expensive water bills.
  • Remote Mount the cooling package from the compressor to reduce noise, or to a cleaner, cooler, more convenient location.
  • Canadian Registry Numbers Available

Heat Removal

N/A Oil Cooler = Compressor Horsepower x 1.15 (motor service factor) x 0.83 (this assumes 83% of input horsepower is rejected to heat)
Aftercooler = Compressor Horsepower x 1.15 (motor service factor) x 0.17 (this assumes 17% of input horsepower is rejected to heat)

Note

N/A

  • Electric motors are totally enclosed, and are not thermally protected.
  • Actual ratings vary with motor brand. Check motor nameplate for actual ratings.
  • Motor RPM is reduced by 1/6 for 50 Hz service.