Medical Oil-less Vane Open Systems

This is a cost-effective solution for applications where oil is not desirable. The simple design requires less routine maintenance than an oil-flooded pump and has a lower initial cost compared to other dry pump designs.

Benefit & Features

  • No oil anywhere
  • Long vane life
  • No water and sewage costs
  • Suitable for dedicated waste anesthesia systems
  • Expandable configurations for skid mounted systems up to quadplex
  • Fully compliant with NFPA 99
  • Manufactured in ISO 9001:2015 certified facilities

 

Unit of Measure
Items
VVOTD-2-413x996.jpg

1.5 HP Duplex Tankmount Oil-less Vane Open System VVOTD0153

VVOTD-2-413x996.jpg

2 HP Duplex Tankmount Oil-less Vane Open System VVOTD0203

VVOTD-2-413x996.jpg

3 HP Duplex Tankmount Oil-less Vane Open System VVOTD0303

VVOTD-2-413x996.jpg

5 HP Duplex Tankmount Oil-less Vane Open System VVOTD0404

VVOTD-2-413x996.jpg

5 HP Duplex Tankmount Oil-less Vane Open System VVOTD0504
Length (A) N/A 53 in N/A 53 in N/A 53 in N/A 54 in N/A 52 in
Width (B) N/A 34 in N/A 34 in N/A 36 in N/A 36 in N/A 37 in
Height (C) N/A 87 in N/A 87 in N/A 90 in N/A 89 in N/A 90 in
Inlet Connection Size N/A 1 in N/A 1 in N/A 1.5 in N/A 1.5 in N/A 1.5 in
Outlet Connection Size N/A 1 in N/A 1 in N/A 1.5 in N/A 1.5 in N/A 1.5 in
Pump Power N/A 1.5 hp N/A 2 hp N/A 3 hp N/A 5 hp N/A 5 hp
Air Flow at 19 inHg1 N/A 5.3 scfm N/A 8 scfm N/A 13.5 scfm N/A 17 scfm N/A 20 scfm
Tank Capacity N/A 80 gal N/A 80 gal N/A 80 gal N/A 120 gal N/A 120 gal
Tank Orientation N/A Vertical
Compressor Capacity N/A 3,819 Btu/hr N/A 5,092 Btu/hr N/A 7,638 Btu/hr N/A 12,730 Btu/hr N/A 12,730 Btu/hr
Sound Level N/A 67 dBA N/A 70 dBA N/A 76 dBA N/A 77 dBA N/A 16 dBA
System Full Load Current (F.L.A) at 208 V N/A 10.4 A N/A 15 A N/A 20 A N/A 30.4 A N/A 30.4 A
System Full Load Current (F.L.A) at 230 V N/A 11 A N/A 14.2 A N/A 18.8 A N/A 28 A N/A 28 A
System Full Load Current (F.L.A) at 460 V N/A 6.8 A N/A 10 A N/A 10.4 A N/A 15 A N/A 15 A
System Weight N/A 550 lb N/A 600 lb N/A 830 lb N/A 1,150 lb N/A 1,200 lb
Brands N/A
Electrical Panel Opening N/A 42 in
Minimum Clearance for Ease of Maintenance N/A 24 in
Motor Voltage N/A 208 V230 V460 V
Phase N/A 3
Power Supply Frequency N/A 60 Hz
Industry Standards/Certifications N/A
Vacuum System N/A The Powerex medical vacuum system is designed to create a suction system to remove unwanted fluids or gases from hospital/ laboratory working areas. The medical vacuum system package is compliant with the NFPA 99 requirements for Risk Category 1 systems. Each system is completely tested before shipment and includes: • Multiple vacuum pumps and associated equipment. • AMSE air receiver. • Medical control panel. Each pump is factory piped to a common intake manifold. Vibration isolation pads are included with the system.
Rotary Vane Vacuum Pump N/A Each pump shall be a dry rotary vane type vacuum pump, and shall be direct-driven by a C-face integrated electric motor enclosed in the pump housing and cooled by the pump fan. • Each vacuum pump shall be dry-running, featuring self-lubricating carbon/graphite vanes and shall not require any sealing fluid in the pumping chamber. • Each vacuum pump shall include an internal relief valve, a check valve, inlet and discharge flex connectors, a 5 micron inlet filter and a pump isolation valve.
Motor N/A The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation. N/A The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation. N/A The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation. N/A The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation. N/A The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation.
Receiver N/A The system shall include an ASME rated air receiver. The tank shall be equipped with a vacuum gauge, a sight gauge, by-pass valves, and a manual drain. Optional internal tank lining for corrosion resistance.
Control Panel N/A The control system provides automatic lead/lag sequencing and automatic alternation of all pumps in order to equalize the amount of usage among the available vacuum pumps. The Premium NFPA Control panel shall include a gateway server card and all features listed below: • PLC controller and a color touch screen panel which displays the operating status of the unit. • Building automation communication gateway with BacNet® protocol and Web server features. Web servers features include email notifications in case the system is in alarm or has achieved one its maintenance intervals and requires service. • Ethernet port for connection to BacNet® server or direct connection to facility Ethernet for viewing of system operations and status via device IP-address. • UL508A listed control panel in a NEMA 12 enclosure. The panel door will include: the HMI touch screen, an audible and visual alarms with an acknowledge button, and an HOA switch for each pump. • Magnetic starters. • Vacuum transducer for process control. • Single point power connection. • Redundant 120Vac control transformers with fused primary and secondary protection. • System overload trip, high temperature conditions or maintenance intervals for the pump will result in visual and audible alarms.
Available Options N/A
Note N/A 3 Year Limited Warranty
  • 1 Air Flow shown at total system capacity.