Utilizing the vehicles own engine for power, Vanair® underdeck rotary screw compressor systems provide you with the exceptional power your crew needs to get the job done where and when they need it -without hauling an expensive air compressor tow-behind. Using a single PTO opening, these systems provide up to 200 CFM (Pump Sold Separately) of impressive air power, AC power or hydraulics, or any combination of all three. At half the cost of a tow-behind, PTO underdeck systems mount seamlessly out of sight, under the vehicle, leaving the towing hitch free for other equipment and opens up the truck bed for additional storage space.
Unit of Measure
Items
Genair® Power Take Off (PTO) Shaft Driven Air Compressors with Generator

Genair® 125 Cubic Feet Per Minute (cfm) Capacity Power Take Off (PTO) Shaft Driven Air Compressor with Generator

Genair® Power Take Off (PTO) Shaft Driven Air Compressors with Generator

Genair® 160 Cubic Feet Per Minute (cfm) Capacity Power Take Off (PTO) Shaft Driven Air Compressor with Generator

Genair® Power Take Off (PTO) Shaft Driven Air Compressors with Generator

Genair® 185 Cubic Feet Per Minute (cfm) Capacity Power Take Off (PTO) Shaft Driven Air Compressor with Generator
Description N/A Utilizing the vehicles own engine for power, Vanair® underdeck rotary screw compressor systems provide you with the exceptional power your crew needs to get the job done where and when they need it -without hauling an expensive air compressor tow-behind. Using a single PTO opening, these systems provide up to 200 CFM (Pump Sold Separately) of impressive air power, AC power or hydraulics, or any combination of all three. At half the cost of a tow-behind, PTO underdeck systems mount seamlessly out of sight, under the vehicle, leaving the towing hitch free for other equipment and opens up the truck bed for additional storage space.
Brands N/A Genair® Vanair®
Capacity N/A 125 cfm N/A 160 cfm N/A 185 cfm
Air Pressure N/A 100 to 150 psi
Compressor Input Speed N/A 1535 rpm N/A 1880 rpm N/A 2160 rpm
Oil Capacity N/A 3.5 gal
Continuous Generator Output N/A 6.6 kW9.6 kW
Generator Voltage N/A 120/240 V120 V
Phase N/A 1
Speed N/A 3600 rpm
Degree of Protection/Insulation Class N/A Ingress Protection (IP54)
Generator Type N/A Brushless Automatic Voltage Regulator (AVR) Totally Enclosed, Fan-Cooled (TEFC)
Minimum Kit Mounted Dry Weight N/A 513 lb
Maximum Kit Mounted Dry Weight N/A 554 lb
Duty Cycle N/A 100 %
Design Life N/A 100,000 hours
Flash Point Temperature N/A 257 ºC495 ºF
Pour Point Temperature N/A -45 ºC-50 ºF
Pressure Rating N/A Up to 250 psi
Industry Standards/Certifications N/A American Society of Mechanical Engineers (ASME) Canadian Registration Number (CRN)
Air Compressor N/A
  • Greater Efficiency for Lower Engine RPMs
  • Integrated Inlet Valve and Rear Discharge Provides Higher Ground Clearance
Generator Specifications N/A
  • Totally Enclosed Fan Cooled Sealed Generator
  • No Brushes for Maintenance-Free Operation
  • Automatic Voltage Regulation (AVR) Regulates to Within ± 2 %
  • 6.6 kW to 9.6 kW Producing 120 or 120/240V at a Constant 60 Hz
  • Ground Fault Circuits and Outlet Panels Available to Meet your Needs
Discharge System N/A
  • In-tank Coalescer System Provides Greater Surface Area for Increased Oil Separation
  • Coalescer is Protected from the Elements, Eliminating the Possibility of Rust or Damage from External Source
  • Less Prescribed Maintenance and Waste Oil Recovery Costs
  • Less than 2 PPM Oil Carryover
  • 5 Year Warranty or 3000 Hours for Replacement on Coalescer Element Only
  • Smaller Tank Design Makes Installation Easier
  • Streamlined Fittings on the End of Tank
Air Filter N/A
  • ABS Plastic Housing
  • Dual Stage
SAE B Pad N/A
  • Limited to 77 Ft. Lbs.
Cooler(S) N/A
  • Air to Oil Heat Exchanger Driven by 12V Fan
Instrumentation N/A Vanair® Total Electronic Control System (V-TEC™)
Diagnostic Monitoring Display Includes:
  • Remote Engine Speed Control
  • Built-In Safety Features
  • Complete Startup & Shutdown Capabilities
  • Oil Temperature & Air Pressure System Checks
  • Troubleshooting & Maintenance Display Assistance & Alerts
  • LCD
Vanguard Rotary Screw Compressor Oil N/A
  • Full Synthetic Oil Exclusively Created for Rotary Screw Compressors
  • Outstanding Thermal and Oxidative Stability
  • Reduced Oil Disposal Due to Extended Drain Intervals
Safety Equipment N/A
  • High-Temperature Shutdown
  • High-Pressure Shutdown
  • Air Pressure-Relief Safety Valve
  • Minimum Pressure Valve
  • Automatic Blowdown on Shutdown
  • Oil Fill Plug Safety Relief
Accessories and Options N/A
  • External, Spin-on Air-Oil Separating Element
  • Dual Pressure
  • Dual Voltage
  • Service/Control Line Moisture Separators
  • Filter/Lubricator/Regulator (FLR)
  • Air Hoses, Hose Reels, and Fittings
  • OSHA Safety Valve (Velocity Fuse)
  • Tool Oiler/Lubricator
  • Biodegradable Vanguard Green™ Synthetic Oil
Hydraulic System Requirements N/A All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair® highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: the hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair® recommends a dedicated pump and hydraulic circuit).
Warranty N/A Lifetime Warranty on Air End
Note N/A Made in USA.