Desiccant Dryers
desiccant-dryers
KAD dryers are ideally suited for moisture sensitive applications such as electronics and pharmaceutical manufacturing, food processing and brewing. /Asset/KAD-Heatless-Regenerated-Desiccant-Dryers.PNG
The Kaeser Modular Membrane Dryer (KMM) produces pressure dew points to -40ºF. It is perfect for small to medium compressed air systems. KMMs do not require electricity or cooling water, which simplifies installation even in existing systems. They are particularly effective in reaching low pressure dew points when used with a refrigerated dryer and installed at the point of use. /Asset/Kaeser-Modular-Membrane--KMM--Dryers-for-Compressed-Air.PNG
KED Heated Purge Desiccant Dryers
(13) Solid state logic accurately controls inlet and purge valves which direct wet compressed air to the regenerated tower, and heated purge air to the tower in need of regeneration. The process of adsorption and desorption can be repeated several thousand times before the desiccant must be replaced. /Asset/DesDryer_KED_46-47221-700x394.jpg KBD Blower Purge Air Desiccant Dryers
(13) Kaeser externally heat-regenerative blower purge desiccant dryer produces dew points as low as -40ºF. Twin desiccant beds of activated alumina alternate between drying and regenerating, with regeneration being accomplished with heated ambient air at just above atmospheric pressure. The heated ambient air readily drives adsorbed moisture off of the desiccant preparing it for another adsorption cycle. The moisture-laden regeneration air exhausts to atmosphere during the regeneration process. KBD dryers can regenerate with little (about 1%) or no process (purge) air loss. /Asset/DesDryer_KBD_46-47219-700x394.jpg KBS Compressed Air Breathing Purifier Systems
The Kaeser Breathing Air System (KBS) is a complete purification system. It is designed to remove contaminants such as moisture, solid particles, oil or oil vapors, carbon monoxide and hydrocarbons from normal compressed air. The KBS meets all quality requirements and international standards such as OSHA, CSA, ISO 12021 and DIN 3188. /Asset/BreathingAirSystem_KBS_46-47217-700x394.jpg KDF Inline Desiccant Dryers with Single Tower Design
(4) Kaeser's KDF series single tower desiccant air dryer significantly lowers compressed air dew points.- Produces pressure dew points as low as -40ºF (-40ºC).
- Rugged powder-painted, corrosion-resistant aluminum housing which can be installed inline
- Charge of silica gel desiccant adsorbs moisture from the compressed air
- Desiccant change-out indicator offers convenient monitoring of desiccant condition
KAD Heatless Regenerated Desiccant Dryers
(60) Kaeser Adsorptive Desiccant dryers (KAD Series) employ a heatless regenerative design to produce pressure dew points as low as -100 ºF. Solid-state controls with adjustable cycle timers allow KAD Series dryers to be easily adapted to user requirements. The optional purge saver control dramatically increases efficiency at reduced flows, and includes active tower lights and a switching failure alarm.KAD dryers are ideally suited for moisture sensitive applications such as electronics and pharmaceutical manufacturing, food processing and brewing. /Asset/KAD-Heatless-Regenerated-Desiccant-Dryers.PNG
Kaeser Modular Membrane (KMM) Dryers for Compressed Air
(9) Innovative, compact dryers for superior efficiency and reliabilityThe Kaeser Modular Membrane Dryer (KMM) produces pressure dew points to -40ºF. It is perfect for small to medium compressed air systems. KMMs do not require electricity or cooling water, which simplifies installation even in existing systems. They are particularly effective in reaching low pressure dew points when used with a refrigerated dryer and installed at the point of use. /Asset/Kaeser-Modular-Membrane--KMM--Dryers-for-Compressed-Air.PNG
