Print Back
The MAG-11 is a magnetically operated zero air loss drain that discharges condensate from all types of compressed air filters and refrigerated dryers by using a unique technology based on magnetic forces.

The MAG-11 uses specially selected magnets that operate the 2/2 way direct acting valve construction.

The discharge process of the MAG-11 is automatic and there is no compressed air lost during the condensate discharge cycle. The specially selected long-life magnets ensure a reliable discharge operation.

The MAG-11 is easy to install with top and side inlet options. The MAGY is ideally suited in applications where power is not available, too expensive or not reliable.

Typically the MAG-11 is installed in refrigerated dryers, filters and under piston compressors.
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Brands

N/A Jorc

Type

N/A Zero Loss

Industry Standards/Certifications

N/A CE NEN - EN - ISO 9001:2015 Certified

Technical Specification

Maximum Filter Capacity

N/A Unlimited
Maximum Drainage Capacity1 N/A 145 L

Minimum/Maximum System Pressure

N/A 0 to 16 barUp to 230 psi

Minimum/Maximum Medium Temperature

N/A 1 to 50 ºC

Minimum/Maximum Ambient Temperature

N/A 1 to 50 ºC

Environmental Protection Inlet

N/A Ingress Protection (IP68) (National Electrical Manufacturers Association (NEMA 6))

Connection Size

N/A 1/2 in

Connection Type

N/A British Standard Pipe (BSP) National Pipe Thread (NPT)

Number of Inlet Options

N/A 2

Top Inlet Height

N/A 10.3 cm

Side Inlet Height

N/A 9 cm

Outlet Connection

N/A 1/8 in. BSP

Valve Type

N/A 2/2 Way Direct Acting

Valve Orifice

N/A 2 mm

Valve Seal

N/A FPM

Serviceable Valve

N/A true

Housing Material

N/A Corrosion Resistant Aluminum Electrophoretic (EP) Coating

Commercial Benefits

Commercial Benefits

N/A
  • Does not require electricity
  • No operating cost once installed
  • Competitive true 'green' solution suitable for all compressed air filters and refrigerated dryers
  • Zero air loss technology saves air, energy and money
  • Low stocking cost advantages for you
  • Low purchase threshold for your customers
  • Consult Jorc for private labelling options

Technical Advantages

Technical Advantages

N/A
  • Two inlet options
  • Robust corrosion resistant aluminum housing
  • Incredibly easy to install and to service
  • No need to unthread the MAG-11 for routine maintenance
  • Direct acting valve, for a reliable discharge
  • Service kit available

Note

Note

N/A Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, Jorc reserves the right to revise information without notice and without incurring any obligation.

Think Green
  • 1 Condensate Per Hour at 16 bar