Compressed Air Systems, Inc.
9303 Stannum St
Tampa, FL, 33619-2658, US
Phone: (800) 626-8177
Fax: 813-628-0187
Email: [email protected]
Website: http://www.CompressedAirSystems.com
All Categories > Clean Air Treatment > Filtration > MST Purification & Filtration > Carbon Monoxide Monitors and Accessories > Contractor CO Monitors > Clemco CMS-4 Carbon Monoxide Monitor > Item # 29766  


CMS-4.jpg

larger image

Item # 29766, Clemco CMS-4 CO Monitor Only
Web Price $765.00

  • Digital liquid crystal display (LCD)
  • Audible, visual, and vibrating alarms
  • Low battery alarm
  • Sensor fail alarm
  • Replaceable sensor and battery
  • Unit calibrated with 25 ppm test gas





Financing  · Specifications  · Includes  · Description of Operation  · Advantages

Financing

Approve Payments
Finance with Approve Payments



Specifications

Accuracy
± 2 ppm

Operating Relative Humidity (Inlet Air - Non Condensing)
Up to 85 %

Operating Temperature
-4 to 104 ºF
-20 to 40 ºC

Battery Type
3V coin-type lithium battery (CR2450)

Continuous Operation
approx. 1 yr (3000 hrs)

Weight
1.60 oz
0.1 lb

Replaces
Item# 24613


Includes
  • 29766 - CMS-4 CO Monitor w/ in-helmet mounting pad
  • 25572 - Calibration Connector Assembly (calibration connector, tubing and cup)
  • 25573 - Test gas (25 ppm CO)


Description of Operation
OSHA requires Grade D quality breathing air and NIOSH-approved Type CE continuous-flow supplied-air respirators for abrasive blast operators. OSHA regulations call for a maximum exposure limit to carbon monoxide of 10 parts per million (ppm). When the presence of carbon monoxide is detected at this level, the CMS-4 emits an audible alarm, a visible flash, and the unit vibrates. When an alarm occurs, the user should remove the respirator immediately when it is safe to do so. To prolong battery life, turn unit off when not in use; turn unit on and re-install at beginning of work shift.


Advantages
  • Blast operator can work independently. No need to rely upon others to warn operator or take action when monitor alarms. No need for remote alarm; each user is individually protected for instant awareness of a hazardous condition.
  • Unit is small, lightweight, and conveniently worn inside blast respirator. Requires no external connections or hoses.
  • Unit can be calibrated in minutes, is easily installed, and easily removed.
  • Long-life, economical easy-to-replace sensor with estimated sensor life of 2 years.
  • Unit uses small commonly-available lithium easy-to-replace battery with estimated life of 3000 hours.
  • Microprocessor controlled with digital read-out for accurate readings.



Print Back