Compressed Air Systems, Inc.
9303 Stannum St
Tampa, FL, 33619-2658, US
Phone: (800) 626-8177
Fax: 813-628-0187
Email: [email protected]
Website: http://www.CompressedAirSystems.com
All Categories > Kaeser Products > Compressed Air Treatment > Kaeser Condensate Management > Condensate Disposal > Kaeser Condensate Filter (KCF) Series Oil/Water Separators > Item # 73469  


Kaeser Condensate Filter (KCF) Series Oil/Water Separators

larger image

Item # 73469, KCF 200 Model Reciprocating Compressor Oil/Water Separator
Web Price QUOTE

The KCM is a small pressure vessel that collects condensate from multiple sources and safely diffuses residual air pressure to maximize separation effectiveness in the Kaeser Condensate Filter (or any oil/water separator).

Available in two models that vent up to 4 and 8 condensate lines, the KCM is constructed from sturdy schedule 80 PVC and has a maximum pressure-at-inlet of 230 psig. Condensate lines are connected via easy push-to-connect fittings.

A venting muffler, mounting hardware, and 5 ft outlet hose are included.





Financing  · Specifications  · Dimensions  · Sizing Guidelines  · Features and Advantages  · Options  · Additional Information  · Note

Financing

Approve Payments
Finance with Approve Payments



Specifications

Brands
Kaeser Compressors

Model
KCF 200

Condensate Inlet (Hose Connection)
1 x 1 in
3 x 1/2 in

Water Outlet (Hose Connection)
1 in

Weight Empty
70.5 lb

Maximum Inlet Pressure
230 psig


Dimensions

Width
20.5 in

Depth
22.6 in

Height
44.1 in


Sizing Guidelines

Compressor
Reciprocating Compressors

Maximum Ambient Temperature
140 ºF

Minimum Ambient Temperature
41 ºF

Maximum Operating Pressure at Inlet
232 psig

Maximum Condensate Temperature
140 ºF

Mineral Oils Compressor Power
130 hp

Synthetic Oils Compressor Power
100 hp

Mineral Oils Compressor Flow
585 scfm

Synthetic Oils Compressor Flow
450 scfm


Features and Advantages
  • Compatible with most standard lubricants.
  • Simple, reliable operation.
  • Quick and easy filter cartridge changeout.
  • No electricity required for operation.
  • Multiple units connect together to handle larger systems.
  • Multiple lines can be connected via optional manifold.
  • Disposal bag provided with each cartridge.


Options
  • Immersion heater with thermostat for cold site installations (KCF 200 and 400 only)
  • High pressure relief chamber (up to 580 psig)
  • Flow splitter allows up to four (4) parallel piped units for large air flow applications
  • High condensate level alarm


Additional Information
Simple installation and maintenance
Kaeser's KCFs are easy to install with no electrical connections or hard piping required. Lid removal knobs make removing and replacing the single filter cartridge simple. The convenient lifting handles enable quick and clean maintenance.

High performance filter
KCFs are durable rotomolded from high-strength, cross-linked polyethylene and work with all compressor fluid types. The filter can then be easily fixed to the KCF casing to drain. Pre-soaking the new filter is not necessary. A disposal bag comes with each set of filters.

Multiple inlet connections
The KCF 25 and 50 have two inlet connections. Plastic plugs are provided to block off any unused connections.


Note
Specifications are subject to change without notice.



Print Back