Five Forms of Power for Light to Medium Industrial Repair

The Air N Arc® 250 provides you with five forms of power in one machine. Offering 250 amps of welding capabilities and a 2-stage reciprocating air compressor for the pressure you need to get the job done, the Air N Arc® 250 performance can’t be beat. It also features a EFI engine to save on fuel and to provide the horsepower you need for effective multi-functioning of tools.
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Brands

N/A Air N Arc® Vanair®

Engine Power

N/A 23 hp

Engine Start

N/A Electric

Engine Make & Model

N/A Kohler®

Compressor Type

N/A Reciprocating

Capacity

N/A 24 cfm

Maximum Rated Pressure

N/A 175 psi

Continuous Alternating Current (AC) Power

N/A 5 kW

Frequency

N/A 60 Hz

Phase

N/A 1

Generator Outlet Voltage

N/A 120 V240 V

Welder

N/A High Frequency DC Welding, 250 AMPS at 100% Duty Cycle

CC: 40-250 AMPs Operating Range, CV: 15-30 Volts

Battery Charger/Booster

N/A 300 AMPs 12V/24V Boost, 50 AMP 12V Charge

Drive System

N/A Belt Driven

Air Storage Capacity

N/A 30 gal

Fuel Storage Capacity

N/A 11.5 gal

Fuel Capacity

N/A 11 Gallon Plumb to Chassis

Dry Weight

N/A 500 to 725 lb

Air Compressor

N/A Two Stage Cast Iron Air Pump for High Pressure Output

Dimensions with Fittings

Length with Fittings (30 Gallon (gal) Air Tank)

N/A 48.8 in

Width with Fittings (30 Gallon (gal) Air Tank)

N/A 23.4 in

Height with Fittings (30 Gallon (gal) Air Tank)

N/A 43.3 in

Length with Fittings (Skid Mount/Remote Tank)

N/A 48.1 in

Width with Fittings (Skid Mount/Remote Tank)

N/A 22.9 in

Height with Fittings (Skid Mount/Remote Tank)

N/A 27.0 in

Special Features

Special Features

N/A
  • Can Run up to a 1" Impact Wrench
  • Will Run Any Voltage Sensing Suitcase Feeder for MIG Welding
  • Small Footprint - Will Fit on Side Pack or Behind Cab
  • Totally Self-Contained But Can be Integrated with the Chassis
  • Powder Coated Galvannealed Sheet Metal
  • All the Benefits of a High Frequency Welder Offering Excellent Weld Characteristics - 100% Duty Cycle
  • Galvannealed Steel Metal
  • Heavy Duty Belt Drive System for Anti-Vibration and Long Service Intervals

Welder Information

Welder Information

N/A
  • High Frequency DC Welding
  • 250 AMPs at 100% Duty Cycle
  • CC Range 40 - 250 AMPs Operating Range
  • CV Range 15 - 30 Volts
  • 100% Completely Controllable. No Preset Settings.
  • Independent Welding Generator
  • Safe Multi-Function
  • Auto Throttle Control
  • In-Tank Coalescer with 5 Year or 3000 Hour Life
  • Less Than 2 PPM Oil Carry-Over
  • Pressure Rated to 250 PSI
  • ASME and CRN Certified
  • Available in Side-Mounted or Vertically Stacked Configurations

Generator Specifications

Generator Specifications

N/A
  • True Two Generator System for Safe Multi-Functioning of Welder and Electric Tools
  • Brushless Generator
  • Smooth Wave for Minimal Distortion
  • Two 120V Outlets and One 240V Outlet Provided

Engine

Engine

N/A
  • 23 HP EFI Kohler
  • Electric Start

Available In

Available In

N/A 30 Gallon or Remote Tank Configuration

Options Accessories

Options Accessories

N/A
  • Welding Cables - 25', 50'
  • Welding Helmet with Auto Darkening Lens
  • Battery Booster Cables
  • Fuel Tank - Slimline 11 Gallons
  • Remote Air Tank - 30 Gallons
  • Electric Fuel Pump
  • Remote Condensation Drain
  • Hose Reels
  • Cold Weather Kits
  • Maintenance Kits
  • Welding Rods
  • Dry Cell Battery
  • GFCI Outlet for Protection for outlets 120V/240V - Remote Panel Machines Only

Remote Control Panel

Remote Control Panel

N/A
  • Provides Ultimate User Convenience and Safety
  • All Functions Accessible at Panel. No Need to Jump In and Out of Vehicle.

Note

Note

N/A Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligation.