Clean, dry, CO2 free purge gas for your laboratory at a fraction of the cost of traditional cylinders

Why buy purge gas in a high pressure cylinder when you can generate your own, more easily, reliably and cost effectively using a CO2 adsorption dryer?

The nano L-Series1 range of CO2 adsorption dryers are small, simple and can be wall mounted right in your laboratory.
Unit of Measure

Financing

Approve Payments

N/A Finance with Approve Payments

Specifications

Shipping Weight

N/A 42.5 lb

Design Operating Pressure Range

N/A 58 to 174 psi

Recommended Operating Temperature Range

N/A 35 to 70 ºF

Alternating Current (AC) Voltage

N/A 100 to 240 V

Power Supply Frequency

N/A 50 Hz60 Hz

Maximum Noise Level (During Depressurization)

N/A 60 dBA

Warranty

N/A 5 years

Industry Standards/Certifications

N/A CE ISO 9001

Technical Specification

Inlet and Outlet Connection Size

N/A 1/2 in

Connection Type

N/A Swagelock

Thread Type

N/A NPT

Inlet Air Flow Required

N/A 212 ft³/h
Outlet Gas Flow Produced1 N/A 127 ft³/h

Dimension A

N/A 43 in

Dimension B

N/A 9 in

Dimension C

N/A 13 in

Dimension D

N/A 10 in

Service Kit Part Number

N/A NDK051

Outlet Gas Quality

Maximum CO2 Content (Standard)

N/A 1 ppm

Maximum Pressure Dew Point (Standard)

N/A -100 ºF

Maximum Particulate Size (Standard)

N/A 1 µm
Maximum Particulate Size (Optional)2 N/A 0.01 µm
Maximum Oil Content (Optional)3 N/A 0.0003 ppm

Features

N/A

  • provides a continuous flow of high quality purge gas
  • no interruptions or pressure fluctuations
  • eliminates cylinder changes
  • reduces instrument recalibration
  • lower cost than high pressure cylinders
  • easy to install and maintain
  • quiet and fully automatic operation
  • can be wall mounted to save space
  • integral pre and after filtration
  • PLC controls with clear text display
  • 100% function and performance tested
  • backed by a 5 year warranty

Applications

N/A

  • FTIR Purge
  • TOC Purge
  • NMR
  • GC Flame Gas
  • Laser Purge

Additional Information

N/A Connect them to your existing compressed air system to deliver a continuous supply of clean, dry and CO2 free purge gas without any of the hassle of traditional cylinders. Ideal for laboratory applications including FTIR purge, TOC purge, NMR, GC flame gas and laser purging, these systems eliminate the interruptions, recalibrations and safety concerns associated with high pressure Oxygen and Nitrogen cylinders.

Developed with the laboratory in mind, nano L1 dryers require no bench space and the innovative exhaust silencing system ensures incredibly quiet operation.

Using proven pressure swing adsorption (PSA) technology, the units feature automatic regeneration and advanced purification cartridges with integral pre and post filtration providing totally clean, dry air with a CO2 level of less than 1 ppm.

It’s time to bring your purge gas supply into the 21st century. There is no better solution for your laboratory purge gas needs.

  • 1 At an inlet conditions of 100 psig and 70 ºF and up to 375 ppm CO2. For all other conditions contact support@n-psi for sizing assistance.
  • 2 Requires addition of a nano M01 particulate after filter at the outlet.
  • 3 Requires addition of a nano M01 coalescing pre filter and an AC activated carbon filter at the inlet.
    Recommended for compressed air systems using an oil flooded compressor.