Item # 29766, Clemco CMS-4 CO Monitor Only On Compressed Air Systems, Inc.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Clean Air Treatment > Filtration > MST Purification & Filtration > Carbon Monoxide Monitors and Accessories > Contractor CO Monitors > Clemco CMS-4 Carbon Monoxide Monitor > Item # 29766


	Item # 29766, Clemco CMS-4 CO Monitor Only
	Web Price $765.00

larger image

Digital liquid crystal display (LCD)
Audible, visual, and vibrating alarms
Low battery alarm
Sensor fail alarm
Replaceable sensor and battery
Unit calibrated with 25 ppm test gas

Financing · Specifications · Includes · Description of Operation · Advantages

Financing

Approve Payments		Finance with Approve Payments

Specifications

Accuracy		± 2 ppm

Operating Relative Humidity (Inlet Air - Non Condensing)		Up to 85 %

Operating Temperature		-4 to 104 ºF -20 to 40 ºC

Battery Type		3V coin-type lithium battery (CR2450)

Continuous Operation		approx. 1 yr (3000 hrs)

Weight		1.60 oz 0.1 lb

Replaces		Item# 24613

Includes

29766 - CMS-4 CO Monitor w/ in-helmet mounting pad
25572 - Calibration Connector Assembly (calibration connector, tubing and cup)
25573 - Test gas (25 ppm CO)

Description of Operation

OSHA requires Grade D quality breathing air and NIOSH-approved Type CE continuous-flow supplied-air respirators for abrasive blast operators. OSHA regulations call for a maximum exposure limit to carbon monoxide of 10 parts per million (ppm). When the presence of carbon monoxide is detected at this level, the CMS-4 emits an audible alarm, a visible flash, and the unit vibrates. When an alarm occurs, the user should remove the respirator immediately when it is safe to do so. To prolong battery life, turn unit off when not in use; turn unit on and re-install at beginning of work shift.

Advantages

Blast operator can work independently. No need to rely upon others to warn operator or take action when monitor alarms. No need for remote alarm; each user is individually protected for instant awareness of a hazardous condition.
Unit is small, lightweight, and conveniently worn inside blast respirator. Requires no external connections or hoses.
Unit can be calibrated in minutes, is easily installed, and easily removed.
Long-life, economical easy-to-replace sensor with estimated sensor life of 2 years.
Unit uses small commonly-available lithium easy-to-replace battery with estimated life of 3000 hours.
Microprocessor controlled with digital read-out for accurate readings.

MORE IMAGES


	· Clemco CMS-3 Diagram

	· Clemco_Industries_160.png

DOWNLOADS


		Finance with Approve Payments

Item # 29766, Clemco CMS-4 CO Monitor Only

Approve Payments

Accuracy

Operating Relative Humidity (Inlet Air - Non Condensing)

Operating Temperature

Battery Type

Continuous Operation

Weight

Replaces

Maintain Your Air Compressor