| Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > Vacuum Pumps, Blowers & Parts > Medical, Laboratory and Industrial Vacuum Pump Systems > Medical Claw Open Vacuum Systems > Item # CVTD0203  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # CVTD0203, 2 HP Duplex Tankmount Medical Claw Open Vaccum System CVTD0203
Web Price QUOTE






Financing  · Dimensions  · Tankmount Vacuum Systems  · Specifications  · Vacuum System  · Rotary Vane Vacuum Pump  · Motor  · Receiver  · Control Panel  · Available Options  · Note

Financing

Approve Payments
Finance with Approve Payments



Dimensions

Length (A)
71 in

Width (B)
42 in

Height (C)
68 in

Inlet Connection Size
1.5 in

Outlet Connection Size
1 in


Tankmount Vacuum Systems

Pump Power
2 hp

Air Flow at 19 inHg1
16 scfm

Tank Capacity
80 gal

Tank Orientation
Horizontal

Compressor Capacity
4,335 Btu/hr

Sound Level
70 dBA

System Full Load Current (F.L.A) at 208 V
14.4 A

System Full Load Current (F.L.A) at 230 V
13.2 A

System Full Load Current (F.L.A) at 460 V
7.6 A

System Weight
1000 lb
1 Air Flow shown at total system capacity.


Specifications

Electrical Panel Opening
42 in

Minimum Clearance for Ease of Maintenance
24 in

Motor Voltage
208 V
230 V
460 V

Phase
3

Power Supply Frequency
60 Hz


Vacuum System
The Powerex medical vacuum system is designed to create a suction system to remove unwanted fluids or gases from hospital/ laboratory working areas. The medical vacuum system package is compliant with the NFPA 99 requirements for Risk Category 1 systems. Each system is completely tested before shipment and includes:

• Multiple vacuum pumps and associated equipment.
• AMSE air receiver.
• Medical control panel. Each pump is factory piped to a common intake manifold. Vibration isolation pads are included with the system.


Rotary Vane Vacuum Pump
Each pump shall be a rotary claw type vacuum pump, and shall be direct-driven through a shaft coupling by a C-face, TEFC electric motor.

• Each vacuum pump shall be dry-running, featuring two claw-type, non-contacting rotors and shall not require any sealing fluid in the pumping chamber, assuring virtually maintenance-free operation.
• Each vacuum pump shall include an internal relief valve, and a built-in, anti-suck-back valve mounted at the pump inlet.
• Each pump within the system shall include a check valve, inlet and discharge flex connectors, a 5 micron inlet filter and a pump isolation valve.


Motor
The motor is continuous duty, C-face, TEFC, suitable for 208-230, or 460V, 3 phase, 60 hertz electrical operation.


Receiver
The system shall include an ASME rated air receiver. The tank shall be equipped with a vacuum gauge, a sight gauge, by-pass valves, and a manual drain.


Control Panel
The control system provides automatic lead/lag sequencing and automatic alternation of all pumps in order to equalize the amount of usage among the available vacuum pumps. The Premium NFPA Control panel shall include a gateway server card and all features listed below:

• PLC controller and a color touch screen panel which displays the operating status of the unit.
• Building automation communication gateway with BacNet® protocol and Web server features. Web servers features include email notifications in case the system is in alarm or has achieved one its maintenance intervals and requires service.
• Ethernet port for connection to BacNet® server or direct connection to facility Ethernet for viewing of system operations and status via device IP-address.
• UL508A listed control panel in a NEMA 12 enclosure. The panel door will include: the HMI touch screen, an audible and visual alarms with an acknowledge button, and an HOA switch for each pump.
• Magnetic starters.
• Vacuum transducer for process control.
• Single point power connection.
• Redundant 120Vac control transformers with fused primary and secondary protection.
• System overload trip, high temperature conditions or maintenance intervals for the pump will result in visual and audible alarms.


Available Options
• Oxygen assured pumps - prepared for use in WAGD systems.
• Internal tank lining for corrosion resistance.
• Variable Frequency Drive (VFD) Control Panel – with Premium NFPA controls.


Note
3 Year Limited Warranty


 MORE IMAGES 

·  WhisperVac-Claw-patented-logo-FINAL-RBG-1536x679.png


 DOWNLOADS 

Medical Vacuum - pages (SR4325).pdf
(PDF, 2183KB)

Finance with Approve Payments

Downloads for 5 to 10 hp Pump Power Industrial Lubricated Rotary Vane Tankmount Simplex Vacuum Systems
(PDF, 747KB)


Maintain Your Air Compressor

Learn more about maintaining your air compressor by downloading our eBook on air compressor maintenance.

 Download eBook