Item # IVS0202, 2 HP Industrial Simplex Lubricated Vane Tankmount Vacuum System On Compressed Air Systems, Inc.

• Miscellaneous Equipment
     Industrial Vacuum System
     Sandblast Equipment
     Railcar Door Opener
     P.O.G.O.
     Air Compressor Piping
     Air Compressor Accessories
     Air Compressor Tools
     Air Compressor Fittings
     Air Compressor Parts
     Air Receiver Tanks
     Air Compressor Lubricant
     Spray Booth
     Refrigerated Air Dryers
     Solberg Air Cleaners
     Nitrogen Generators
     Vacuum and Pressure Gauges
     Compressed Air Dryers
     Air Purification Systems      Rotary Vane Vacuum Pumps      Air Blower Options

Search Catalog



	All Categories Industrial Lubricated Rotary Vane Vacuum Systems

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > Vacuum Pumps, Blowers & Parts > Medical, Laboratory and Industrial Vacuum Pump Systems > Industrial Lubricated Rotary Vane Vacuum Systems > Item # IVS0202


	Item # IVS0202, 2 HP Industrial Simplex Lubricated Vane Tankmount Vacuum System
	Web Price QUOTE

larger image

Financing · Dimensions · Tankmount Vacuum Systems · Specifications · Vacuum System · Rotary Vane Vacuum Pump · Motor · Receiver · Control Panel · Available Options · Note

Financing

Approve Payments		Finance with Approve Payments

Dimensions

Length (A)		37 in

Width (B)		30 in

Height (C)		71 in

Inlet Connection Size		1.5 in

Outlet Connection Size		1.25 in

Tankmount Vacuum Systems

Pump Power

2 hp

Air Flow at 19 inHg¹

11 scfm

Tank Capacity

60 gal

Tank Orientation

Vertical

Compressor Capacity

4,335 Btu/hr

Sound Level

70 dBA

System Full Load Current (F.L.A) at 208 V

7.6 A

System Full Load Current (F.L.A) at 230 V

7.4 A

System Full Load Current (F.L.A) at 460 V

4.7 A

System Weight

435 lb

¹ Air Flow shown at total system capacity.

Specifications

Brands		Powerex®

Electrical Panel Opening		42 in

Minimum Clearance for Ease of Maintenance		24 in

Motor Voltage		208 to 230 V 460 V

Phase		3

Power Supply Frequency		60 Hz

Industry Standards/Certifications		EISA NEMA

Vacuum System

The package shall include one or two vacuum pumps and associated equipment, one ASME tank and one control panel. Each pump is factory piped to a common intake manifold. The system shall be completely tested prior to shipment. Vibration isolation pads for installation between the system mounting feet and the floor shall be included with the system.

Rotary Vane Vacuum Pump

The vacuum pumps shall be of the rotary vane aircooled design. Each vacuum pump shall be direct driven through a shaft coupling by a TEFC electric motor. Belt drives shall not be permitted. Each vacuum pump shall be air-cooled and have absolutely no water requirements. Each vacuum pump shall have an end (ultimate) vacuum of 29.3" Hg (15 torr). Lubrication shall be provided by an integral, fully recirculating oil supply that is filtered by an automotive type, spin-on oil filter. Non-re-circulating (once through) or partial re-circulating oil supply systems shall not be permitted. Each vacuum pump shall be capable of operation with standard SAE 30 weight oil. The oil separation systems hall be integral and shall consist of no less than three stages of internally installed oil and smoke eliminators through which the exhaust gas stream must pass. This system shall consist of bulk separation, oil mist elimination, and smoke elimination, and shall be capable of removing 99.9+ percent of all oil and smoke particles from the exhaust gas stream. Each vacuum pump shall include a built-in, anti-suck-back valve, mounted at the pump inlet, and three sliding vanes. Each vacuum pump shall be equipped with a 10 micron inlet filter for removal of particulates. The vacuum pumps shall be mounted on vibration isolators. The system shall also include a supplementary check valve between the inlet filter and the pump.

Motor

The motor is EISA compliant, continuous duty, NEMA rated, C-face, TEFC, suitable for 208-230, or 460 V, 3 phase, 60 hertz electrical operation.

Receiver

The system shall include an ASME rated receiver rated for full vacuum. The tank shall be equipped with a vacuum gauge and a manual drain.

Control Panel

The system shall include a UL listed control panel in a NEMA 1 enclosure in simplex or duplex configurations utilizing a 120 V control transformer with fused primary and secondary protection. The control panel also includes the following accessories for each pump:

Run time indicator, magnetic starter with 3-leg overload protection and Hand/Off/Auto selector switch. Standard features shall also include minimum run timers via a PLC or time delay relay for each pump and timed lead/lag pump alternation to maintain even run hours on each pump. The lag vacuum pump shall be able to start automatically if the lead vacuum pump fails to operate.

Available Options

High discharge air temperature shutdown alarm with visual and audible indicators and dry contacts
Internal tank lining for corrosion resistance
Tank Sight Gauge
Exhaust flex hose with drip leg and valve

Note

Control panel will include a magnetic starter with overload protection, an hour meter, an on/off switch, and a minimum run timer for the pump.

MORE IMAGES


	· IVD-570x570.jpg

	· CLASS-ZERO.png

DOWNLOADS


		Industrial-Vacuum-Systems-Brochure-pages-121417.pdf (PDF, 820KB)

		Finance with Approve Payments

Item # IVS0202, 2 HP Industrial Simplex Lubricated Vane Tankmount Vacuum System

Approve Payments

Length (A)

Width (B)

Height (C)

Inlet Connection Size

Outlet Connection Size

Pump Power

Air Flow at 19 inHg1

Tank Capacity

Tank Orientation

Compressor Capacity

Sound Level

System Full Load Current (F.L.A) at 208 V

System Full Load Current (F.L.A) at 230 V

System Full Load Current (F.L.A) at 460 V

System Weight

Brands

Electrical Panel Opening

Minimum Clearance for Ease of Maintenance

Motor Voltage

Phase

Power Supply Frequency

Industry Standards/Certifications

Air Flow at 19 inHg¹