Request Information Finance with Approve Payments

CAS commercial gas and diesel compressors are designed for applications that require air on the go. The units are designed with durability and reliability in mind. The features of the CAS gas and diesel driven compressors are designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. No more walking all the way around the truck to start the compressor. The unloader is at your finger tip so you can unload the compressor before starting. This means your solenoid and starter will last much longer. The transfer tube is protected by the receiver.

All units include the following features:

  • Solid cast iron pump
  • Head unloaded
  • Low rpm
  • Disc and spring valves
  • Centrifugal unloader
  • Low pump rpm
  • Oil sight glass
  • Oil drain and fill on front of
    compressor pump

  • 70% duty cycle
  • OSHA style totally enclosed belt guard
  • ASME code receivers
  • On board battery with recharge system
  • Automatic tank drain
  • Belt guard aftercooler
  • Vibration pads
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Shipping Weight

 N/A 395 lbs395 lb

Brands

 N/A Vanair®

Horsepower

 N/A 13 hp

Flow at 90 psi

 N/A 24.3 cfm

Flow at 175 psi

 N/A 18.4 cfm

Drive Engine

 N/A Honda GX390

Engine Start

 N/A Electric

Tank

 N/A 30 gallon

Dimensions (L x W x H)

 N/A 42 x 22 x 42 inches

Pump Warranty (Optional)

 N/A 5 years

Operating Pressure

 N/A Up to 190 psi

Features

Features

 N/A
  • Easy use pump oil drain
  • Easy view oil sight glass
  • Electric start drive engine
  • Engine idle control for fuel savings
  • Engine has recharging system
  • Fork slot width mounting feet for more stable base and more maneuverability
  • Inline pump for smooth operation
  • Low rpm pump for lower operating temperature
  • OSHA compliant belt guard
  • Oversized pump flywheel for better pump cooling
  • Pilot valve for continuous operation
  • Solid cast iron pump
  • Stainless steel flexible 1200° F rated air line
  • Swedish steel reed valves
  • Vibration isolation mount included
  • 2-stage compressor pump
  • 2-piece tank design for more mounting options of compressor system
  • 30 Gallon ASME/CRN Air Receiver

Options

Options

 N/A
  • Battery mounted and wired
  • Belt guard after cooler

Additional Information

Additional Information

 N/A
  • Electric start drive engine with recharge capabilities for a battery
  • Stainless steel flexible air line rated for over 1200°F provide more cooling and a longer life span for the package
  • Pneumatic Throttle Control
  • 2 piece tank design for more mounting options and vibration reduction pads
  • Wide solid weld mounting feet for easier mounting, stability, and longer life span.

Note

Note

 N/A No Start Up Kit Required.