Features

12 CFM @ 125 PSI
Free Air CFM 14.9

• Heavy Duty solid cast iron pump
• Disk & spring valves
• Swedish steel valve components
• Low RPM pump
• Heavy duty solid rubber tires
• Industrial grade gas engine
• Fully enclosed belt guard
• Heavy Duty air filter
• Heavy Duty lifting handles
• Pilot valve continuous operation
• Low profile design

CAS commercial gas and diesel compressors are designed for applications that require air on the go. The units are designed with durability and reliability in mind. The features of the CAS gas and diesel driven compressors are designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. No more walking all the way around the truck to start the compressor. The unloader is at your finger tip so you can unload the compressor before starting. This means your solenoid and starter will last much longer. The transfer tube is protected by the receiver.

All units include the following features:

• Solid cast iron pump
• Head unloaded
• Low rpm
• Disc and spring valves
• Centrifugal unloader
• Low pump rpm
• Oil sight glass
• Oil drain and fill on front of
  compressor pump

• 70% duty cycle
• OSHA style totally enclosed belt guard
• ASME code receivers
• On board battery with recharge system
• Automatic tank drain
• Belt guard aftercooler
• Vibration pads

The CAS portable screw compressors are designed for the most demanding portable compressor applications. The screw air end is designed for years of service in high duty cycle applications. If your application calls for high cfm output in a small package the CAS portable screw compressor is built with you in mind.

G-43 Pump Features:

• Electric start motor idles when unloaded
• 30 gallon ASME receiver unit delivers 60 cfm @ 150psi.
• Operating pressures from 100-180 psi
• German made rotary screw air end spin on separator and oil filter
• low oil shut down and temp shut down
• High pressure shut down

The CAS portable screw compressors are designed for the most demanding portable compressor applications. The screw air end is designed for years of service in high duty cycle applications. If your application calls for high cfm output in a small package the CAS portable screw compressor is built with you in mind.

G-43 Pump Features:

• Electric start motor idles when unloaded
• 30 gallon ASME receiver unit delivers 60 cfm @ 150psi.
• Operating pressures from 100-180 psi
• German made rotary screw air end spin on separator and oil filter
• low oil shut down and temp shut down
• High pressure shut down